Table of Contents
How do you read a land survey?
How do you read a plat of survey?
Plat maps list the house number for each parcel, along with the shape of the parcel, or the parcel boundary. The small numbers along the bottom of the parcel is the width, and the number along the right side of the parcel is the depth. Most plat maps have these numbers in feet.
What do the numbers mean on a survey?
Each segment will contain numbers and letters indicating the direction from North that the line proceeds as well as the distance to the next point. For example, a segment may have the notation N 15° 30′ 45″ E on one side of the line and the notation 166.25′ on the other side of the line.
What does a lot survey show?
Property surveys are done to determine or confirm land boundaries, such as the plot of land a home sits on and any sub-surface improvements like a septic tank or well, and identify other types of restrictions and conditions that apply to the legal description of a property, including easements or encroachments.
What does R mean in surveying?
random line used in a road layout. Bearing The direction of a line between 0° and 90°, measured clockwise or. counterclockwise from north or south. Glossary of Terms Used in Boundary Surveying. Page 2.
How do you read GPS coordinates on a survey map?
When outlining the coordinates of a location, the line of latitude is always given first followed by the line of longitude. Therefore, the coordinates of this location will be: 10°N latitude, 70°W longitude. The line of latitude is read as 41 degrees (41°), 24 minutes (24′), 12.2 seconds (12.2”) north.
What does B l mean on a survey?
BSL – Building Setback Line.
What does FF mean on a survey?
Also referred to as FF is Finished Floor Elevation. The term FFE refers to the top of the structural slab and its elevation above sea level. FG. Finished grade. The term FG refers to the elevation above sea level for the finished grade or finished ground.
What does TP mean in surveying?
TIE POINT – The point to which a survey connection is made.
What is a land surveyor salary?
What will a surveyor check?
A property or house survey is a detailed inspection of a property’s condition. The surveyor inspects the property and tells you if there are structural problems like unstable walls or subsidence. They will highlight any major repairs or alterations needed, such as fixing the roof or chimney chute.
How do I find my property lines online?
Yes, you can find your property lines online. Your county may have online maps for all of the real estate in your area, accessible through the official county or assessor’s website. Property lines can also be found through any online search engine on Geographical Information System (GIS) maps.
What do survey colors mean?
It shows where the digging will occur. Pink indicates temporary survey markings. When a land surveyor visits to precisely draw the exact lines between adjoining properties, he or she will mark the ground in pink. This indicates the legal boundaries affecting the project. Red is the color for electrical equipment.
How do you read a metes and bounds?
A metes and bounds description, which means distance and direction, begins and ends at a landmark called the point of beginning (POB). The property is measured and described in a point of direction from a starting point using angles, distance, directions, and landmarks.
How do you read a lot description?
The more common method used in land surveys and property descriptions uses quadrants. The quadrants are northeast, southeast, southwest and northwest. For an example of N25°E, face north, then turn 25 degrees to the east and go that direction. If your bearing is S40°W, face south and turn 40 degrees to the west.
What is BSD in land survey?
Subdivision of Lots. Bsd – By Private land surveyors. Psd – By Private land surveyors. Consolidation of Lots. Bcn – By Public land surveyors.
What is measurement in land survey?
In Surveying all measurements are horizontal, can be inclined; reduce to horizontal and vertical components in plotting. Distance between 2 points on a plan or map is always horizontal distance irrespective of their elevation, (distance between their projection on horizontal plane).
What does SIP mean on a survey?
As you know, SIP (Session Initiation Protocol) is evolving, thus this Survey does as well….! Companies of all sizes are moving from legacy (TDM) lines to SIP trunks – this has been clear and well documented for years now. Whilst some are adopting Hosted services instead of having systems on-Premises.
What does PC and PT stand for in surveying?
PC: Point of curvature. The point at which a straight line begins to curve, i.e. the point of tangency to the curve; See PT. PCC: Point of compound curvature. The point where curves of different radii meet.
What does MBL mean on a survey?
MBL = Minimum Building Limit?Mar 4, 2007.
How do I find the GPS coordinates for my property?
From an Android device: Open the Google Maps app. Zoom in to your property’s location. Tap and press your property’s location until a red pin appears. (It must be a point that isn’t already labeled). The GPS coordinates will appear in the search box at the top of the map.
Do you read longitude or latitude first?
Handy tip: when giving a co-ordinate, latitude (north or south) always precedes longitude (east or west). Latitude and longitude are divided in degrees (°), minutes (‘) and seconds (“). There are 60 minutes in a degree and 60 seconds in a minute (similar to measuring time).
