Table of Contents
How do you read scale drawings?
The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.
How do you calculate architectural scale?
Set the ratio as the size of the design on the paper to the size of the design in real life. In the example, 1.5 feet to 40 feet. Evaluate the ratio to find the scale. In the example, 1.5 feet divided by 40 feet equals 0.0375, so the scale of the object is 0.0375 to 1.0.
How do you read scales on architectural drawings?
When reading a scaled drawing, the scale is shown as the length in the drawing, then a colon (“:”), and then the matching length on the real object.
How do you read an architect scale 1 8?
The drawings state that the scale is 1/8 inch equals 1 foot. Using your architect scale, select the face of the tool with the 1/8 mark in the upper left-hand corner. Lay the “0” point at the extreme left end of this line, and read the corresponding value at the right end of the line.
What are three types of scale in architecture?
Typically, architecture deals with different types of scale: Human scale: The human interaction with environments based on physical dimensions, capabilities and limits. Intimate scale: This is a smaller, more personal scale.
How many scales are on an architect’s scale?
For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum. Architect’s scales may be flat, with 4 scales, or have asymmetric 3-lobed cross-section, with 6 or 12 scales.
What does 5/16 look like on a ruler?
The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.
What does 1 cm look like on a ruler?
Each centimeter is labeled on the ruler (1-30). Example: You take out a ruler to measure the width of your fingernail. The ruler stops at 1 cm, meaning that your nail is precisely 1 cm wide. So if you counted five lines from 9 cm, for instance, you’d get 9.5 cm (or 95 mm).
What is 3/16 on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements Fraction Decimal Millimeters 1 ⁄ 8 “ 0.125 3.175 3 ⁄ 16 “ 0.1875 4.7625 1 ⁄ 4 “ 0.25 6.35 5 ⁄ 16 “ 0.3125 7.9375.
What does a 1/2 scale mean?
Metric Scale Half scale is 1:2. It is helpful to think of this as one unit on the drawing equals two units on the object. A small object can be enlarged on the paper and drawn in 2:1 scale. This means the drawing of the object is twice as large as the object itself.
What size is 1/8 scale in inches?
1:8 – 60 cm (24 in) long. 1:5 – 92 cm (36 in) long. 1:4 – 120 cm (48 in) long.
What is a 1/8 scale?
Scale is a measurement we use to give customers an idea of how big your model will be when comparing to the real-life object. If you see the scale 1:8, this means your completed model will be eight times smaller than the real thing.
What architect scale is most commonly used?
Most commonly used scales for floor plans are the 1/8 and 1/4. The 3/8 and 3/4 are often used for detailed sections.
How do you read a blueprint scale?
Lay the proper scale next to the item on the drawing and take the measurement. The scale will translate for you. As an example, a 1/4 inch = 1 foot architect scale will have markings that increase by 1 foot every 1/4 inch; a 4 foot wall is represented by a 1-inch length, if measured with a conventional ruler.
How do you read a 1 50 scale ruler?
You could also say, 1 unit in the drawing is equal to 100 units in real life. So, if we were drawing a table that measured 100cm wide by 200cm long at a scale of 1:50, you would draw the table 2cm wide by 4cm long on your piece of paper. This is worked out by dividing the real life size (100cm) by 50 (1:50 scale).
How do you read a 1 75 scale ruler?
On this scale, each small division represents 2 mm, and each longer bar represents 10 mm. On the 1:75 scale, the intermediate is not numbered, but it is there at, again, 500 mm. The 1, 2, 3, etc are metres, and each small division is 5 mm. You just have to use the scales to get a feel for the divisions.
Where is MM on architect ruler?
The number on the left of the colon refers to one unit measurement (eg. mm) on the page as a representation of real life. The number on the right of the colon refers to how many time larger the real-life measurement is (in the same unit – mm).
What is a 1/20 scale?
What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions.
What is 10 mm on a ruler?
Look at the unmarked lines on a metric ruler. If you look closely, you’ll notice that there are 10 millimeters in a centimeter. The medium-sized line at the halfway point between each numbered centimeter measurement represents half a centimeter, or 5 millimeters.
