Table of Contents
How do you read scales on architectural drawings?
When reading a scaled drawing, the scale is shown as the length in the drawing, then a colon (“:”), and then the matching length on the real object.
How does an architectural scale work?
An Architect’s or scale ruler is designed for use in determining the actual dimensions of a distance on a scaled drawing. For example, 1/8 on the ruler is in fact a scale that converts 1/8 inch on the drawing to 1 foot. This would represent a drawing with a scale of 1/8″ = 1 foot.
How do you read a plan scale?
The scale for floor plans can be shown in two different ways: As equivalent measurements, eg 1/8″ = 1′ or 1cm = 1m, “an eighth of an inch represents 1 foot” or “1cm represents 1m” As a ratio eg 1:96 or 1:100, “one to forty eight” or “one to one hundred”.
How many scales are on an architect’s ruler?
For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum. Architect’s scales may be flat, with 4 scales, or have asymmetric 3-lobed cross-section, with 6 or 12 scales.
What does scale 1.50 mean?
1:50 is a ratio. it means you’re scaling 1 unit to 50 units. that could be inches (1″=50″) or miles (1 mile=50 miles) or anything else, but it’s a direct scale.
What are three types of scale in architecture?
Typically, architecture deals with different types of scale: Human scale: The human interaction with environments based on physical dimensions, capabilities and limits. Intimate scale: This is a smaller, more personal scale.
How do you find the scale of a ruler?
The first inch of the scale ruler is subdivided into twelfths, corresponding to inches. Line up the zero line with the mark representing the foot line of the first measurement, and use the detailed marking to find the number of inches. The full measurement will be the number of feet plus this number of inches.
How do you use a 1 50 scale ruler?
You could also say, 1 unit in the drawing is equal to 100 units in real life. So, if we were drawing a table that measured 100cm wide by 200cm long at a scale of 1:50, you would draw the table 2cm wide by 4cm long on your piece of paper. This is worked out by dividing the real life size (100cm) by 50 (1:50 scale).
How do you convert scales to drawings?
Drawings can be scaled up or down using either a calculator or a scale rule. To scale a drawing using a calculator: divide the measurement by the scale if you want to reduce the drawing in size, or. multiply the measurement by the scale if you want to increase it in size.
What is the most common architectural scale?
Architect Scale. The architect’s scale is used by architects and builders for obtaining measurements from scaled drawings of buildings and other structures. It is typically three-sided with 11 scales or flat with 4 scales. It is available in lengths ranging from 4″ to 36″ although 12″ models are most common.
What does a 1/4 scale mean?
A 1/4″ scale means that each 1/4″ (inch) on the plan counts for 1′ (feet) of actual physical length. To scale a blueprint in imperial units to actual feet. multiply the measurement on the drawing (in inches decimal equivalent) with the denominator.
How do you calculate scale?
To scale an object to a larger size, you simply multiply each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 5 cm, you simply multiply 5 × 6 = 30 cm to get the new dimension.
What does it mean if a scale is 1 96?
There are standard Imperial measurement scales and standard metric measurement scales. The scale 1:48 means 48 feet on the real ship would be equal to 1 foot on a model. A model with an Imperial scale of 1:96 or a Metric scale of 1:100 will be very close to being the same size.
What does a 1/100 scale mean?
Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre).
How do you use a 1 100 scale?
A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.
What is triangular scale?
A triangular scale is a ruler that has a 3-lobed cross-section with 6 different types of scales on the edges (2 on each face) used for measuring and preparing scale drawings such as blueprints and maps. It is also called an architect’s scale.
What does 5/16 look like on a ruler?
The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.
What do the lines on a ruler mean?
Each of these tiny lines represents a fraction of an inch. There are five different lengths of lines in total. Each inch is divided into 16 lines, meaning that the space between each line is 1/16 inch long—this is the smallest length you can measure with a ruler.
What are the lines on a ruler called?
A ruler or measuring tape can be used to measure lengths in both metric and customary units. Here, the ruler is marked in centimeters (cms) along the top and in inches along the bottom. The marks or intervals on a ruler are called hash marks.
