Table of Contents
How long should a downrod be for a 20 foot ceiling?
The recommendable downrod length is between a minimum of two and three inches. A 14 feet ceiling need at least nine feet of distance between the appliance and the floor. The downrod may vary between forty and forty-eight inches. A 20 feet ceiling would require a professional to make a more precise analysis of the room.
How do you remove the fan from a high ceiling?
How do I choose a downrod length?
The most common method used to find the right downrod length is to take the ceiling height, subtract the height of the ceiling fan (most fans are between 12 and 18 inches in height depending on the fan), and then subtract the desired hanging height (usually eight feet).
How big of a downrod do I need?
The length of your downrod depends on the height of your ceiling. For safety reasons, a ceiling fan should always hang at least 7′ above the floor. Also, for maximum air flow there should be at least 10 inches of air space between the blades and the ceiling.
How far can a ceiling fan hang down?
You will want your new ceiling fan to hang between 8′ and 9′ above the floor, regardless of ceiling height. Most fan bodies (including mounting hardware) are 8 to 12 inches. So, whatever your ceiling height is in feet, buy a downrod that will put the top base of the fan at 10 feet.
How far should a ceiling fan be from a vaulted ceiling?
But in general, a small room with a vaulted ceiling should take a 42-44 inch fan. You may get away with a ceiling fan as large as 60″ depending on ceiling height and room layout. For a large room with a sloped ceiling, there are choices all the way up to 96 inches.
How do you get high ceilings?
10 tricks interior designers use to make living room ceilings Choose low-slung furniture to make a ceiling look higher. Hang tall, slim mirrors. Paint below dado level in a darker shade than above. Frame the walls. Opt for a single color, floor to ceiling. Hang a vertically striped wallpaper.
Are ceiling fans outdated?
Sure, there are outdated ceiling fans, but that doesn’t mean all ceiling fans are old-fashioned. The key is finding one that suits your style and decor. “Ceiling fans are practical and perform an important function in an interior space,” says Morris.
Can you put a downrod on any fan?
In most cases, the “pole” or down rod, can be added to an existing fan. These down rods are available at hardware stores in different lengths (18, 24, and up to 36 inches), and in different finishes, such as brass, white, etc.
How long should a downrod be for vaulted ceilings?
Determine Downrod Length Most ceiling fan manufacturers include a short downrod in the box, but to install a ceiling fan safely on a vaulted or cathedral ceiling you will need to have a total downrod length of at least 12 inches.
Are fan down rods universal?
Ceiling fan downrods are not universal. They might be similar if the same manufacturer makes them. If you need a replacement, you will need to know the manufacturer, the model, and the diameter of the downrod.
Can a ceiling fan be too close to the ceiling?
Except with very low ceilings, avoid locating the fan too close to the ceiling. It will not distribute air as well. However, for safety, the blades should never be less than 7′ above the floor.
Are all ceiling fan Downrods the same diameter?
Ceiling fan downrods are not universal. Each manufacturer creates downrods to fit with their particular design of ceiling fans. They differ in their UL rating, diameter, color, and type of installation.
What is a downrod?
A downrod is a pipe, usually metal, that connects the fan, or specifically the motor housing of the fan, to the ceiling mount.
Can you put a ceiling fan on a 7 foot ceiling?
Because building codes require fan blades to be at least 7 feet from the floor, it is not possible to install a ceiling fan on a 7 foot high ceiling and still meet safety standards.
What is a downrod mount ceiling fan?
A ceiling fan downrod is a metal pipe that connects the motor housing to the mounting hardware, stabilizing the ceiling fan and reducing the potential for wobbling. Downrods range in diameter and length depending on the ceiling fan type and application.
How do you find the angle of a sloped ceiling?
Calculate the angle formed between the bottom line and the sloped line on the right, using the protractor. Place the center point of the protractor on the endpoint on the right side of the bottom line and see where the sloped line lines up on the protractor. This is the angle of your ceiling’s pitch.
How do you find the angle of a vaulted ceiling?
Stand at one wall where the ceiling slopes down to meet it. Place an angled tape measure at the seam between the ceiling and wall. Pull it out so it measures the the sloping portion of the ceiling. Take this measurement.
Can you hang a ceiling fan on a sloped ceiling?
Most (but not all) ceiling fans on the market today can be installed on a ceiling angled up to 28 degrees without any problem or any extra accessories needed. So if you have a ceiling angle up to 28 degrees, you should not have any issues finding a fan to install.
