Table of Contents
Is Spot UV raised?
Spot UV is a flat finish of a shiny layer that goes on the exact spot where you would like your printed piece to have an area of a high gloss coating. Raised Spot UV is the same process, except the UV that gets applied stands out from the product, that if you run your fingers over the card you will feel the UV.
Can you spot UV over foil?
Maximum ink coverage Ink that is not cured can flake off the board, including any finishes on top, i.e. foil and varnish. With large areas, the adhesion of the laminate can also be affected, and UV varnish can give a mottled effect. Maximum ink coverage should not therefore exceed 300%.
Can you spot UV on uncoated stock?
Perhaps a slightly controversial comment as I have seen it done before but ideally, Spot UV varnish on uncoated stocks should be avoided. As uncoated stocks are very absorbent in comparison to coated stocks, the very runny varnish is instantly absorbed into the material.
How is spot UV done?
Spot UV is a liquid varnish applied on top of the printed surface that creates a high-gloss shine. The printed parent sheets are run through the press and then exposed to ultraviolet light hardening the varnish.
What does raised spot UV mean?
Our regular Spot UV is a flat finish, a shiny gloss layer that is applied where you’re seeking an area of high gloss coating. Raised Spot UV coating uses a similar process, except the applied UV is high off the card. Regular Spot UV is printed offset, and Raised Spot gloss is printed digitally.
What is raised spot UV printing?
Raised UV printing, (also referred to as 3D UV or Sculpted UV), is a spot UV technique that builds up the UV coating to create dimension you can both see and feel. Raised UV allows the clear UV coating to be completely independent of ink or pressing a design through both sides of a piece.
What is a spot UV finish?
Spot UV is the final finish in the printing process. This means that all ink layers are laid down, any paper lamination is added, and the drying process completed first. The Spot UV is then printed on top of the paper, as a clear gloss, and then dried for the finished result.
What is Spot UV and foiling?
Foiling & Spot UV Varnish Traditional foil printing means applying metallic foil to paper or card with heated plates containing the image. Traditional Spot UV varnishing is applied as a liquid, then exposed to Ultra-Violet light which dries it instantly.
What is foil blocking?
What is foil blocking? Foil blocking uses a letterpress-style block, to imprint a design onto paper, however, instead of ink, a ultra-thin film carrying a foil pigment is fed into a press. The block is heated and when pressed onto the paper a bond is formed and the foil is released.
Can you print on top of foil?
Foil papers and other media were formerly only in the realm of custom printing. Now, however, you can find foil paper coated with a printable surface that allows you to print anything from your computer onto it that you can print on plain white bond paper.
How do I know if my paper is coated or uncoated?
Coated papers have a coating on them (typically clay), so they’re “sealed.” This restricts the amount of ink that is absorbed into the paper, allowing the ink to sit on top of the paper, in a crisp defined dot. Uncoated papers do not have this coating and thus are more porous.
How do I know if my paper is coated?
Coated paper has a matte or glossy finish. It’s usually very smooth with a slight shine, sometimes with a high shine.
Is coated or uncoated paper better?
Coated paper has an agent added to its surface in order to improve brightness, smoothness, or other printing properties. Finally, coated paper is more resistant to dirt, moisture, and wear, which will help it to last longer. Uncoated paper does not have a coating to fill in between the fibers.
What is a spot UV finish on a business card?
Spot Gloss (spot UV) is a coating that’s applied on top of your card to highlight certain parts. The spot UV finish adds a subtle, shiny smooth surface to any element you want to stand out.
What is spot printing?
Spot printing uses pre-mixed colors, usually in 1, 2, or 3 color printing applications. Each color is applied to the paper separately and requires it’s own unique printing plate. Most often, Pantone or PMS colors are used in spot printing.
How do you make a spot color in InDesign?
In Indesign, open the swatch window. click on the downward black triangle to the right and choose New Color. This opens a New Color Swatch Window. Select Spot as color type and Pantone Solid Uncoated as the Color Mode.
How do I export a UV spot?
Export the Spot UV layer – by turning off all layers except the new Spot UV layer, then export as a single PDF with all trim marks. 10. Proceed to export the CMYK file by turning off the Spot UV layer, then export all CMYK layers with trim marks.
What is spot UV on Vistaprint?
UV Coating is a tough clear-coat applied over printed matter. Spot UV can be applied over inked images to enhance a printed design. Or, it can be applied directly to the paper substrate to create the design by itself, without the use of any ink.
What does spot gloss mean?
Spot UV and spot gloss are common terms for the print finishing technique of applying a high gloss UV coating to a selective area on a printed piece. A common use of spot UV is to draw attention to a certain area of the printed piece, such as placing spot UV over a logo so that only the logo area is glossy.
What is embossed printing?
In the printing industry, Embossing refers to a method of pressing an image into paper or cardstock to create a three dimensional design. Embossing results in a raised surface, with the design higher than the surrounding paper area. A similar but less common technique is Debossing.
