Table of Contents
Can you put drywall directly on concrete?
You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.
How can I cover my concrete basement walls?
Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall. Such treatments give basement walls a smooth, even surface that accepts finish materials such as paint, wallpaper, or paneling.
How do you cover concrete walls in a basement without drywall?
The alternatives besides drywall or studs that can be used to finish your basement wall are wood planks, plastic panels, veneer plaster, wahoo walls, plywood, and pegboards. These options are easy to set up and maintain compared to drywall or studs that have problems with moisture and dust.
How do you stick drywall to concrete?
Hang the drywall on the furring strips as if you were hanging it on studs, using 1-inch drywall screws or drywall nails. This is the best way to attach drywall to concrete.
What can I use for basement walls instead of drywall?
After insulating your basement walls with closed-cell, injection-molded EPS foam panels from InSoFast, install your drywall, cement board, wood siding or other alternatives over the panels in the same exact way they are installed over traditional wood framing.
Can I use regular drywall in basement?
Standard drywall will be just fine—However, if you wish to use green board–wetech gave you the answer—call a drywall supply company.
How do you finish a basement wall cheaply?
Paneling. Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.
How hard is it to drywall a basement?
Hanging drywall is not too difficult, and you don’t need a bunch of tools either. It can get very dusty, though, especially as you cut drywall sheets. The 4′ x 9′ drywall sheets we used are not extremely heavy, but they are kind of big and uncomfortable to move around. Dec 16, 2018.
How much does it cost to put up drywall in a basement?
Cost to Drywall a Basement Installing drywall costs an average of $1,850 or about $2 per square foot. Finishing basement walls in a 400 square foot space may run you $800, while 1,500 square feet is closer to $3,000.
Do you need mold resistant drywall in a basement?
Nor will it prevent mold in the case of flooding, when water saturates the drywall and the organic wood framing behind it. But in rooms that experience frequent humidity and are often subject to mold and mildew, such as bathrooms or basements, mold-resistant drywall is a good choice.
Should I drywall my basement walls?
DON’T finish walls until the basement is dry. Even if your basement walls have no visible cracks or leaks you may still have moisture issues. In some cases, taking steps to keep water away from the foundation, such as installing gutters and downspouts, will reduce basement humidity.
Do I need a permit to finish my basement?
In most instances, you will need a permit to finish a basement. Many municipalities require permits for finishing a basement if you install a new wall. The definition of a wall includes installing drywall over a previously existing framed wall. Any type of plumbing, electrical, or HVAC work will also require a permit.
Is there a cheaper alternative to drywall?
Plywood is the cheapest alternative to drywall on this list and allows you to finish a room with a certain flair without taking on the expenses of wood planks, veneer or drywall.
How do you seal a gap between concrete and drywall?
The gap between slab and foundation is an in-built design unless the gap is larger than 0.4 inches. If that’s the case, you can seal the gap between the concrete and wall using a concrete caulk. Or by taping the gap using window seal tapes. But make sure to seal it before it cracks up even more.
How far off drywall is concrete?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.
Does a finished basement add value to a house?
“When done well, a finished basement will add significant value to your property. On average, a finished basement will give you a 75% return on your investment. In areas where extra living space is in great demand, this will be even higher,” says Katie DeWeese, an interior design, remodel and redesign specialist.
What drywall is best for basement?
Due to the often damp conditions of the basement, be sure to choose sheetrock that is at least moisture-resistant (often call greenboard) but be on the lookout for products that are specifically resistant to mold and mildew (some kinds of purple board).
How thick should drywall be in basement?
¼” Drywall: This is the thinnest sheet of drywall available. It is the ideal choice for remodeling your basement, or for any residential interior walls and ceilings that do not require thick reinforcement.
What is the most expensive part of finishing a basement?
Framing an unfinished basement can be very expensive due to both the labor and lumber costs. Surprising to many, the cost of lumber can actually end up being the most expensive part of the project. One way to offset those costs is by using metal studs.
Is it worth finishing a basement?
A finished basement can increase your property’s value by 70%. While a basement does not add to the overall square footage of the house, that fact is usually beside the point for homeowners. Finished basements often function as an informal living room/family room, office, home classroom space, and guest rooms.
