Table of Contents
While setting up Ring Video Doorbell 2, you’ll be asked to put the device into Setup Mode. In order to put the device into Setup Mode, press and release the black button on the front of the doorbell. Note: The Ring Video Doorbell 2 has a gray battery with a silver clip, which can be removed completely from the device.
How do I put my Ring Doorbell 3 in pairing mode?
Setting Up Your Ring Video Doorbell 3 Plus in the Ring App Step One – Charge the provided battery. Step Two – Insert the Battery. Step Three – Download the Ring App. Step Four – Create or Log in to Your Account. Step Five – Tap Setup Device. Step Six – Scan the QR code or MAC ID barcode on your Ring device.
Where is the pairing button on Ring Doorbell?
Press and release the orange button on the back of your Ring Video Doorbell. When there is a spinning white light on the front of your Ring Video Doorbell, tap the “Continue” button in your Ring app. The Ring wifi network is a temporary access point that you join briefly during the setup of a Ring device.
Why is my Ring Doorbell not connecting?
If you’re using an Android phone and can’t connect to the Ring network, you may need to adjust the Smart Network Switch. If you’re setting up a new Ring device that’s battery-powered, your battery will be partially charged when you receive it because there are legal restrictions on shipping lithium batteries.
How do you put a Ring in discovery mode?
Before starting, you’ll need to download Amazon’s Alexa app, if you haven’t already done so. Open Alexa. In the menu that appears, tap Skills & Games. On the next screen, search for Ring in the search box. After you’ve found Ring, tap the “enable” button. Next, Alexa will ask you to sign in to your Ring account.
Where is the 5 digit PIN code on ring doorbell?
Each Ring Alarm device has a unique QR code and 5-digit code on the back.
Where is reset button on Ring Doorbell?
Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.
Why is my Ring Doorbell not finding my Wi-Fi?
What is this? Another reason why your Ring device can’t seem to find your network connection might be that your network is on the 5 GHz band. The Ring Doorbell is compatible only with a 2.4 GHz network. In this case, you have to connect to a router that’s transmitting on the 2.4 GHz band instead.
How do I activate a Ring device?
If you’re using Android, swipe down from the top of your screen, tap WiFi, then tap the Ring WiFi network. The network will be named something like Ring-123456. Then connect the Ring doorbell to your WiFi. Make sure to connect to the WiFi network closest to where the Ring doorbell will be installed.
How do I reset my Ring Doorbell Wi-Fi?
To reset/reconnect Wi-Fi on the Ring Doorbell: Remove the doorbell from its mount. Log into the Ring app and tap the menu icon. Select your doorbell, followed by “Device Health” and “Change Wi-Fi Network.” Press the orange button on the back of your Ring. Use your phone to connect to the Ring.
Why is my Ring Doorbell flashing blue?
A flashing blue light means that the Ring Doorbell is re-starting or booting. If this continues without stopping for a long period of time, then your doorbell might be stuck in a boot loop. If this is the case, contacting support might be a wise move. If the light has 4 blue LEDs flashing four times.
How do I reset my Ring Doorbell from previous owner?
How Do You Reset the Ring Doorbell for a New Owner? Remove the back plate from the Ring. Hold the orange button on the back of the device for 15-20 seconds. Once you see the Ring flash a light on the front, you’ll know it has completed the hard reset successfully.
How do you reset a doorbell?
Locate the orange button located physically on the back of the doorbell. Press and hold the orange button for more than 15 seconds. Release the button after 15 seconds. The light on the front of the doorbell should flash a few times indicating the device is resetting.
How do I connect my Ring base station to my Wi-Fi?
INTERNET ACCESS: You can connect your Base Station to the internet using wifi or Ethernet cable.Finally, make sure your phone or tablet has Bluetooth enabled. Open the Ring app and tap Set Up a Device. Next, tap Alarm. Select a location, or add a new one. Tap Base Station.
How do I connect my Ring Doorbell 2 to Wi-Fi?
Press the Home button on your phone to leave the Ring app. Navigate to the Settings app, then tap wifi. Select the Ring wifi network from the list of available networks. The network will appear as either: Once connected, close your “Settings” app and return to the Ring app.
How do I transfer ownership of Ring Doorbell?
To release ownership of a Ring device if you’re moving, gifting or selling your Ring device: Open the Ring app. Tap the three lines on the top left. Tap Devices. Select the device you want to release from your ownership. Tap Device Settings. Tap General Settings. Select Remove this Device.
What do the colors mean on the Ring Doorbell?
Similar to Ring Doorbell’s light, Ring Chime’s blue light indicates the device’s status. A solid blue light means Chime is working correctly, no light means the device isn’t receiving power, and a blinking blue light means something else is happening with your device.
Why is my Ring Doorbell blinking?
This happens whenever your doorbell loses power or if it receives an automatic firmware update. When the doorbell is flashing steadily, all you need to do is wait and allow your Ring Doorbell to reboot. This action may take a few minutes.
Can you tell if someone is watching you on Ring?
There isn’t any way to know if someone is watching you on a Ring camera—at least not through physical observation. However, it’s possible you could see the infrared light at night turn on if the camera is active—assuming the night vision is on and you’re at the correct angle to view it.
