Table of Contents
How hard is it to put grommets in curtains?
Grommets add a modern and professional finish to any curtain panel. They also tend to cost more than regular drapes. However, adding grommets to premade or custom panels isn’t as hard as it looks. The secret to having a well-tailored grommet panel is grommet tape.
How full should grommet curtains be?
The grommet panel must be a minimum of 70 inches wide, between the side hem seams, to provide just slightly more than 1.5 times fullness on the 40-inch space. Purchase more panels and push the grommets closer together on the rod for a fuller look.
Why are grommet curtains so popular?
Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets come in a variety of sizes and colors so they are easily worked into any decor.
What can I use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.
What is the difference between an eyelet and a grommet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
What kind of rod do you use for grommet curtains?
For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod. It’s large enough to allow for curtain movement in windy conditions as well; the curtain can billow without rigid stress from an inflexible mounting system.
How do you know what size grommets to buy?
Sizes for grommets are generally listed as a the measurement of the inside diameter (the hole). In the chart below we have provided exact measurements for inside diameter/outside diameter/depth. For size 12, we carry both size #12 and size #12L, both have same inside diameter but 12L is wider overall.
Do you need a tool to install grommets?
The actual grommet installation “tools” can consist of a single grommet plier, or a combination of a setter and anvil. Grommet Pliers are normally used for small grommets and eyelets. For larger grommets, as we mentioned above, you use a setter and anvil to exactly match the size of the grommet.
Do grommet curtains slide easily?
Grommet Curtains Curtains with a grommet top have metal rings punched into the fabric that allow them to slide along the rod easily. They’re especially good for wide windows or sliding glass doors where heavy fabric can be difficult to open.
How much wider should grommet curtains be than the window?
The curtain width should measure 1 ½ to double the width of the window for fullness.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
What is the difference between pinch pleat and grommet?
Two prong pleats are good for showing off a patterned fabric and using more drapery rings. Grommets are casual and more modern. Two prong pleats are good for showing off a patterned fabric and using more drapery rings.
Can you use rings with grommet curtains?
Panels with grommets require rings that can open, slip through the grommets, and snap closed. You can also slide the grommets directly over the rod. With pinch pleat drapes, opt for eyelet rings, which feature hooks to connect to pin-on drapery hooks.
How do you make curtains look fuller?
To do it, you cut the toilet paper rolls to about three inches in length. Next, remove your curtains from the rod. As you rethread them on the rod, insert a toilet paper roll between every other opening. Rehang your curtains, and they’ll look both pleated and fuller.
How can I make my curtains Fuller?
1. Hang them high—and wide. Mount your curtain hardware as close to the ceiling as possible for a high-end look. Longer panels will be able to reach the floor from a high rod, and make your space appear taller.
How do I sew curtain rings?
Sew curtain rings to the backs of the panels, attaching them at the hem line at the top, using a technique called tacking. With needle and thread, make two or three stitches in the same place, one on top of the other, then secure them with a back stitch. Do not sew through to the outside layer of the curtain.
Do grommets hurt?
Grommets can be made of plastic or metal. They don’t hurt, and they allow air to enter the middle ear and drain the fluid to the back of the nose and throat. Grommets are also known as tympanostomy tubes or ventilation tubes.
Can you put grommets in plastic?
Metal grommets are most common because they’re the most durable, but rubber and plastic grommets are best used when you don’t want the grommet to have sharp edges. Fortunately, whatever type you’re using, installing grommets is a cinch if you have the right tools!.
Which is better eyelets or grommets?
Grommets are much stronger than eyelets and used in situations that call for a more reinforced and longer lasting hold, such as permanent signage and heavy curtains or drapes.
