Table of Contents
Can grommets be added to curtains?
Grommets add a modern and professional finish to any curtain panel. They also tend to cost more than regular drapes. However, adding grommets to premade or custom panels isn’t as hard as it looks. The secret to having a well-tailored grommet panel is grommet tape.
How far apart do you put grommets on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How do you measure for grommets in curtains?
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
How do you measure the width of grommet curtains?
Related Articles Measure from the center of one grommet to the center of the next grommet. Hang the chosen curtain rod in place on the window wall. Determine the space you want the curtains to cover. Multiply the space available by 1.5 for a typical grommet curtain panel fullness.
Where should a curtain rod be placed?
DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
What kind of rod do you use for grommet curtains?
For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod. It’s large enough to allow for curtain movement in windy conditions as well; the curtain can billow without rigid stress from an inflexible mounting system.
Can I hang grommet curtains on a traverse rod?
Traverse rods are often installed pretty close to the wall. Grommet drapes typically need more depth since they have to accommodate the fabric that folds back to the wall.
How do you hang grommet curtains without a rod?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
What is the difference between an eyelet and a grommet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
How many grommet panels do I need?
Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
How many grommets do I need for a shower curtain?
Standard shower curtains are 72” square with twelve grommets or buttonholes across the top to correspond to the hook placement in the accompanying vinyl liner. Measure your tub or shower to be sure this size works for you and adjust as needed to fit.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
What size is #2 grommet?
Grommet and Eyelet Sizing Chart Size Outside Diameter (in millimeters) Depth (in millimeters) #0 (1/4″) 11.5mm 5.5mm #1 (5/16″) 17.5mm 6mm #2 (3/8″) 19mm 7mm #3 (7/16″) 22mm 7mm.
How wide should curtains be for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
Are curtains measured from the eyelet?
Measuring for Eyelet Curtains Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!.
What is the proper height for curtain rods?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Where do you hang curtain rods with trim?
Hang Curtains High Bare minimum: at least 3” to 6” higher than the top of the window, if you have that much room to work with. Even better: halfway between the top of the window and the ceiling, plus an inch or two. If you have crown molding, mount the curtain rod right beneath the crown molding.
