Table of Contents
How do I add chemicals to my pool for the first time?
Tips for Adding Start-Up Pool Chemicals Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.
What chemicals do you put in an above ground pool?
Pool Chemicals 101 For Above Ground Pools Chlorine. We all know this is the most important chemical for pool care. Calcium. Calcium chloride is a hardener, which helps reduce stains- especially on vinyl above-ground pools. Cyanuric Acid. This chemical helps keep chlorine stable. Algaecide. Alkaline. Shock. In Review.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
How soon can you swim in a newly filled pool?
Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it’s advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool’s water—or until one filter cycle has been completed.
Can I pour chlorine into the skimmer?
You can add chlorine in tablets and sticks directly to the skimmer, and they slowly dissolve into the pool water. Liquid chlorine comes in gallon containers. You can apply it by pouring the liquid into the skimmer or directly into the pool water.
How often should I shock my above ground pool?
It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.
How do you treat an above ground pool for the first time?
Top Tips for Maintaining an Above Ground Pool Install a Sump Pump in Your House. Test the Chlorine Level. Do Weekly Shock Treatments. Test the pH Level. Run the Pool’s Pump at Least Eight Hours a Day. Regularly Clean and Replace the Filter. Regularly Clean Out the Pump and Skimmer Baskets. Vacuum Often.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
Can you swim in pool before adding chemicals?
Keep the pump running and test the pool water daily. Add chlorine until the chlorine level is between 1.0 and 2.0. Although some sources allow chlorine levels as high as 3.5, this may be irritating to skin and eyes. Allow 24 hours for the pool chemicals to stabilize.
What do you do after you fill up your pool?
Add a clarifier to the water. The clarifier will help the filter to remove the very tiny particles that enter the pool in the filling process or that may remain following construction and installation. 5. Start the pump and filtration equipment and allow the water to circulate for 24 hours, if practical.
What to do after pool is filled with water?
What Do You Do After an Above Ground Pool Is Filled With Water? Step 1: Learn about how to prevent drowning and pool chemical injuries. Step 2: Turn on the filter. Step 3: Vacuum and skim off debris. Step 4: Test the water, and then test it again. Step 5: Enjoy your pool, but safely!.
How do you balance new pool water?
7 Steps to Balance Pool Water Test and Adjust Total Alkalinity. Total Alkalinity (TA) is the first thing you should balance in your pool water. Test and Adjust pH. Measure and Adjust Calcium Hardness. Add Sanitizer to Your Water. Check and Adjust Cyanuric Acid. Shock Your Swimming Pool.
Should I use a floating chlorine dispenser?
We do not recommend using floating chlorine dispensers in inground liner pools. They are great until they get caught in the step or skimmer area or sink to the floor of the pool, laying chlorine right onto the vinyl. Below, you can see the chlorine damage to a vinyl liner caused by a floating chlorine dispenser.
Is it better to put chlorine tablets in skimmer or floater?
While a floater does not distribute chlorine as evenly as an in-line chlorinator, it is still a great form of swimming pool chlorination. Never put chlorine tablets into the skimmer baskets of your pool. High levels of chlorine close to the pool pump, pool filter, and pool heater can damage the equipment.
