Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you support a heavy fireplace mantel?
The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How far should a fireplace mantel stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How do you install a solid mantle?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do you install a floating mantel?
Here’s how to install a floating mantel!How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How thick should a fireplace mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How do you bond wood to brick?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
How do you secure wood to brick?
When applying the glue, simply pace glue onto the wood surface in beads, and then stick the wood to the brick. You’ll need to hold the piece of wood in place until the glue is dry or you can also use masonry nails to hold the wood in place.
How do you anchor wood into brick?
Place your mounting bracket or other mount of choice against the wall, over the pre-drilled hole. Using a nut driver on the hammer drill, put the anchor in place. Drive the anchor into the pre-drilled hole until the head is flush with the mounting bracket (or the wood itself). Repeat this on the other side and voila!.
How do you secure a mantel to Brick?
Mark where the anchors or brackets line up on the mantel and drill the corresponding holes. Lift the mantel and place it so that the lag bolts or brackets fit into the holes. For extra security, coat the tip of each bolt with liquid nails or another adhesive just before installation.
Why do fireplaces have mantles?
Why Do Fireplaces Have Mantels? The purpose of a fireplace mantel was traditionally to catch smoke before it entered the room from the firebox of an open fireplace, but mantels in more modern times are used primarily for decorative and aesthetic purposes.
How high should mantle be with TV above?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
Can you put a TV on a mantel?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
Can you change fireplace mantel?
While mantels come in a variety of styles, most modern mantels are not a single, solid piece of wood. You can replace a fireplace mantel with one that suits your home’s decor in a couple of hours with some basic hand tools.
Should a fireplace mantel be wider than the fireplace?
Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.
What is standard mantel height?
Standard Mantel Height Again, “proper” height is relatively subjective to your fireplace, but average or standard fireplace mantel height construction is around 54” above the hearth’s floor.
What is the typical height of a mantle?
As such, there is some flexibility with personal preference when it comes to the height of your mantle. The average height ranges between 50 and 60 inches because as a general rule mantles are never lower than 50 inches, but they can be above 60 depending on what look and feel you are going for in your house.
