Table of Contents
Deck Hot Tub Installation Requirements A concrete slab is effective at supporting a hot tub. This must be installed along with the concrete deck footings of your deck. For most, a slab four inches thick should suffice, unless one decides to get a very large hot tub then something thicker should be poured.
How do you attach a hot tub to a deck?
Ensure your structure can support a hot tub. For saving sight lines around small spaces, sinking the hot tub in the deck area is an excellent idea. When recessing your hot tub into a deck, leave about 16-18” rise above the deck to allow for the cover to fit over the hot tub when not in use.
Do you need to reinforce a deck for a hot tub?
Decks come in all shapes and sizes. Hot tubs, however, are very heavy, especially when filled with water, and chances are that your existing deck can’t safely support it without additional reinforcement. Fortunately, reinforcing your deck in preparation for a hot tub is a relatively easy task.
Can I put a portable hot tub on my deck?
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Can you build a deck around a hot tub?
Yes. Many people build decks around their hot tubs. You will need to have access to the service side of the hot tub, which is usually the front. You can leave this area without decking or plan a service hatch that will allow for a service technician to easily access the equipment if needed.
How much weight can a 10×10 deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot.
Will joist hangers support a hot tub?
Don’t use a ledger board or joist hangers when building a hot tub deck.
Will my decking hold a lazy spa?
Can my deck hold a hot tub? If you’re thinking of putting up an inflatable hot tub on your decking, have no fear! Wooden decking shouldn’t have any issues holding a tub full of water and people, as long as it’s close to the ground.
How heavy is a 6 person hot tub?
There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
Is getting a hot tub worth it?
THE REAL VALUE OF YOUR HOT TUB INVESTMENT When you use your hot tub regularly and thoroughly enjoy its intended benefits, it’s worth the investment. When you choose the right hot tub, you won’t regret the investment. In fact, you’ll most likely discover the benefits you never even expected.
Can you put a hot tub on a Trex deck?
A hot tub or spa full of water can exert as much as 112 lbs per square foot of decking. A fraction of the 500lbs or more of concentrated load most composite decking can support. Making composite decking strong enough for under and around a hot tub.
Can I put an inflatable hot tub on my balcony?
If you’re placing a hot tub on a balcony, inside a high-rise apartment, or even on a rooftop deck, you’ll have to make adjustments for proper drainage. But filling and draining a spa placed on a balcony will mean running a hose from a faucet to the hot tub to fill it, and from the spa to your bathtub to drain it.
How high should a hot tub be above a deck?
Many builders recommend installing the hot tub so that its edge is 17-24 inches above the decking. Guests can sit on the rim and swing around into the water more easily.
How much space do you need around a hot tub?
A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.
Can a deck hold 5000 lbs?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So, a 100 sqft deck would be designed to support 5000 lbs.
What is a floating deck?
A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.
Can I put pool on deck?
You can place a pool on a wooden deck if the construction takes into account several factors. Of course, pools are very heavy. Finally, water moving around in your pool creates a lot of swaying and stress on a wood deck. Construct a deck that can hold up to the weight and stress of supporting a pool.
What is a hot tub pad?
Spa pads are wonderful hot tub accessories that provide a sturdy base for most hot tubs, while still allowing for flexibility in location. People who opt for an indoor hot tub typically use spa pads so that they won’t need to do any major renovations, however, spa pads can be implemented outdoors as well!Oct 30, 2019.
Can 2×6 support a hot tub?
To use 2×6 you’ll probably need to be 8″ o.c. and the beams on 2′ centers, with piers @ 2′ centers… Hot tubs are no joke and 2×6’s should not be considered at ALL.
What is the best base to put a hot tub on?
Concrete Base This tends to be a common approach for hot tubs becuase it offers strong support for the weight and also keeps the area nice and clean. Concrete is solid, not overly expensive and is quite easy to lay.
