Table of Contents
Here are the 4 steps to installing a clutch on a go-kart. Slide the Clutch Onto the Crankshaft. Set the Clutch into Position. Align the Clutch Sprocket With the Rear Axle Sprocket. Do Final Preparations and Testing.
How do you install a clutch on a 212cc Predator engine?
6 Easy Steps to Install a Clutch on Predator 212 Oil or Greese the bushing of the clutch. Insert a 3/4“ spacer or washers on the Crankshaft. Place the Clutch into the Crankshaft by aligning the key of the clutch and the slot in the shaft. Tighten the bolt.
Where is the clutch on a go-kart?
Therefore, it’s important that a go-kart clutch is positioned on the crankshaft correctly and that it’s aligned parallel to the rear wheel sprocket of the axle. Additionally, it must also engage at an optimal rpm range to avoid excessive slippage.
Do you need a clutch for a go-kart?
Most off-road and racing go-karts use a transmission, unless they have a direct drive configuration. You’ll most likely come across go-karts that use a torque converter or a clutch, as a transmission. When it comes to transmissions, there is a long-standing battle between torque converters and clutches.
What kind of clutch do I need for a Predator 212?
For a Predator 212cc, you need a 3/4″ clutch.
Are all go kart clutches the same?
Go-kart chains come in different sizes and the size requirements depend on the size of your rear sprocket and clutch sprocket. What is this? Always ensure that the clutch sprocket and the rear sprocket require the same chain size.
What is a torque converter for go kart?
Torque converters are variable transmissions for go-karts that are attached to the side of the engine. They provide a variable gear ratio and are therefore ideal for lower-speeds, heavy stop-and-go situations or climbing uneven terrain.
Why is my centrifugal clutch not engaging?
Most of the time, it’s due to worn out friction material of the flyweights/shoes, which need to be replaced. Occasionally, it can also occur if the clutch was incorrectly lubricated and some of the oil entered into the clutch drum, which will lead to a lack of friction between the flyweights and the drum.
Why is my centrifugal clutch smoking?
When a part of your go-kart is smoking, an investigation into the reason is required before more damage occurs. The most common cause, usually the main culprit, is that the clutch is engaging, but it’s not fully grabbing. It is generally due to the engine not being powerful enough to get through the engagement stage.
How do you drive a go-kart fast?
10 Advanced Go Karting Tips To Go Faster In An Indoor Go Kart Tip #1 Don’t Slide. Tip #2 As close as possible to the apex, every time. Tip #3 Find marks so you can time your actions perfectly. Tip #4. Tip #5 Don’t lean in, Do lean out of turns. Tip #6 Steady hands, don’t wobble the steering wheel when in a turn.
How much HP can a centrifugal clutch handle?
NORAM centrifugal clutches are designed to fit engines ranging from fractional horsepower up through 50 HP applications.
Why does my go-kart take off when I start it?
If your go kart takes off by itself when the engine is started, with no one in the drivers seat, that is an indication that the clutch is badly in need of lubrication. Turn the engine off and park the machine up against a tree or fence to prevent it from taking off when you crank the engine again.
Can you adjust a centrifugal clutch?
Place the cover to the clutch back on the engine, and tighten it down. Your centrifugal clutch may have a different type of adjuster screw, such as a hex-key screw. Check your owner’s manual for the right tool to have for adjusting the screw.
Does Predator 212 come with clutch?
Yes it will fit the Predator 6.5 HP 212cc engine. You will have to get set screws though the clutch doesn’t come with them.
Does a Predator 212 need a clutch?
As you can see, the Predator 212cc engine has two compatible centrifugal clutch that can be used: the 10T & 3/4″ Clutch and the 12T & 3/4″ Clutch.
What does a Go Kart clutch do?
How does a go kart clutch work? The clutch is an automatic transmission that is activated by the increased rpm of the engine. The clutch should not engage when the kart is at idle. When heat damage occurs, the clutch will never disengage and the machine will start taking off by itself as soon as you start the engine.
What is a dry clutch?
Dry Clutches The purpose of a dry clutch is the same as a wet clutch. The only difference between the two types of clutches is that the dry ones aren’t covered in oil. Without the oil, the clutch can’t stay as cool, which causes dry clutches to be noisier and wear out more quickly.
How long will a centrifugal clutch last?
Improper installation of the centrifugal clutch can result in its failure as quickly as in a couple of minutes. Still though, even if installed properly, it won’t last more than five years maximum.
What size go-kart engine do I need?
The best go kart engine for kids should sit right around 5-7 hp, have a 3/4″ shaft, and fit a centrifugal clutch or 30 series torque converter, and has a standard bolt pattern for easy mounting.
What is the difference between a clutch and a torque converter?
The difference between the two systems comes down to that the clutch is manually operated, while the torque converter continuously operates without any manual input, so is part of the automatic transmission.
