Table of Contents
How do you change the tune on AutoCal?
Registered. Plug your tuner into the OBD-II port and turn the key to run with the engine off. Scroll down until you come to the section of tunes that begin with “Full” not “Program”. The program options will give an error and will not flash the vehicle, you must use the Full tunes.
How do I unlink my AutoCal?
Tuners can manage unlinking of an AutoCal by physically unlinking AutoCal or by generating a Remote-Unlink Code that can be emailed to their customer. Refer to the FlashScan Link to AutoCal help file for more information. AutoCal End Users can also purchase the AutoCal Unlink product from the EFILive store.
How many tunes can an AutoCal hold?
You can have more than one tune on your AutoCal ready to load/switch tunes, if the tuner does ctz files you could have up to 4 different tunes on one AutoCal.
How do I unlock my AutoCal?
You must either send your AutoCal back to the original* tuner or have the tuner send you an un-link code that allows you to un-link the AutoCal without sending it back. Either way you need the tuner who originally linked the AutoCal to agree to unlink the AutoCal.
What is V3 AutoCal?
SKU: EFILive V3 Autocal. The EFILive V3 Autocal is a scan tool for GM and Cummins vehicles. It also supports module flashing. Tuning is not included. This is only a scan tool used for diagnostic purposes.
What does a DSP 5 switch do?
The CSP5 and DSP5 switches allows users to switch on the fly between 5 user defined tunes. With the DSP5 switch, you can change your tuning “on-the-fly”. Tuning not included, you must have DSP5 Tuning for use with this switch.
How do I know if AutoCal is linked?
One you find the EFILive Control Panel, click on the “F7: Licensing” button. In the upper right corner of that page you’ll see the “Link FlashScan and Autocal” box. Click the Link button and the 2 devices will be linked.
What is EFI Live AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. It allows the tuner to update and optimize the original tune without shipping and/or removing controllers from customers’ vehicles.
How do I connect FlashScan to AutoCal?
Remote Link AutoCal Connect your FlashScan device to your PC. Start the EFILive V8 Scan and Tune application. Open the Control Panel. Select the [F7: Licensing] option. Select [Link]. Click on the drop down of [Link] button and select [Generate Remote-Link Code]. Enter the serial number of the AutoCal to be linked.
Can you tune multiple trucks with AutoCal?
The autocal can do up to 5 trucks FYI.
Can EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
What does EFI Live do for Duramax?
EFILive is a tuning tool that allows you to electronically crack open the stock ECU and TCM in ’01-to-current Chevys and GMCs, and ’06-to-’09 Cummins-powered Rams and access and adjust the data. Many street trucks rely on EFILive software for everything from tow tunes on up.
Is AutoCal Vin locked?
AutoCal is locked to tuner and V.I.N., as I understand it, maybe Phil at Anarchy Diesel will chime in with clarification. A new V-2 comes with two V.I.N.’s, if the owner has only used one then you will only need to buy the tune.
How do I add my VIN to AutoCal?
Click the [F7: Licenses] button in the left-hand pane. Click the [F3: VINs] button in the left-hand pane. Paste the Activation Code and enter the License number from your email. Select [Activate VIN License] to add the licenses to the device.
Does EFI Live unlock ECM?
To reduce lead times for tuners sending ECM’s off site to be unlocked, EFILive has added an option to unlock selected controllers by trying every possible key in a defined range for selected controller types.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
How long is a DSP-5 GOOD FOR?
DSP-5 Export License Application Requirements – ITAR Export Compliance.
How does a DSP switch work?
The DSP2 switch works by switching the voltage level at an ECM pin. The ECM monitors the voltage to determine which program you wish to run. When the switch is open, the ECM will use the factory maps, when the switch is closed (grounded) the ECM will use the DSP2 tables.
Can you switch EFI live on the fly?
By adding the DSP5 switch to your EFI Live tuned Duramax, you can change tunes on the fly. That means no more waiting on a programmer to download changes by reflashing the computer through the OBD2 port. With the installation of this switch, changing tunes is as easy as reaching over and turning a knob!.
Will EFI Live delete DPF?
Registered. Yes EFILive can do DPF delete tuning.
Is EFILive free?
Since the software is available for free on the EFILive website, what you are really purchasing is the license and the hardware. All the vendors appear to be charging the same price. Some include a free sample tune and DSP2 switch.
How do you load music on AutoCal V3?
To move tune files and log files from AutoCal V3 to your PC; Connect AutoCal V3 to your PC. Open EFILive Explorer. Navigate to the directory on your PC where you wish to save the file. Navigate to: [F3: Data Files]. Select appropriate folder on your AutoCal device and drag the selected file to your PC.
