Table of Contents
How easy is it to replace a toilet?
Replacing and installing a new toilet isn’t as hard as it may sound. All you need are a few hours, a helper and the right tools and toilet parts for the job.
How do you know if toilet is installed correctly?
When preparing to install the toilet, the first thing to confirm is the proper flange height. With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor.
What is the last step when installing a toilet?
The final step is to seal around the base of the toilet with silicone caulk. It’s wise to use your toilet for a day or two before applying the silicone. You want to be extra sure there are no leaks from the base.
How long after a new toilet is installed can you use it?
Once the toilet is installed, you should wait at least 6 to 12 hours to ensure that all the work won’t go to waste. No caulk or grout used – In this case, you don’t have to wait as there is nothing that needs to dry.
How long should it take to install a toilet?
Installing a toilet takes between 1 hour and 4 hours depending on the level of experience and type of toilet you’re planning to install. Once your toilet installation is complete, you’ll want to fit a toilet seat. If you’re unsure how to do this then check out our guide to fitting a toilet seat which will help you.
How should a toilet flange sit on the floor?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.
Should the toilet flange be on top of tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Can a toilet be installed incorrectly?
If the toilet rocks back and forth, either the bolts have broken or come loose, the flange is cracked, or the toilet was installed incorrectly.
Do you need to caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?Oct 4, 2021.
Can you use 2 wax rings when installing a toilet?
You can certainly install a toilet with multiple wax rings, in fact sometimes it is necessary to make sure you don’t have a leak. You can buy an extra-thick wax ring, or you can just buy two rings and stack one on top of the other.
Can you use shims to level a toilet?
Toilet shims are thin plastic or rubber tabs that are used to level a toilet. You can also use homemade wooden shims or stainless steel coins. If a toilet is installed on an uneven floor or if the toilet flange is too high off the floor, the toilet will need to be shimmed.
How do you stop a toilet from rocking?
Instructions Check the Bolts First. Sometimes a rocking toilet can be fixed by tightening the two flange bolts, or closet bolts, at the base of the toilet. Look for Leaks. Confirm that your toilet is not leaking. Locate the Gaps. Insert the Shims. Trim the Shims. Caulk Around the Base. Let the Caulk Dry.
What happens if toilet is not level?
If the floor is not perfectly flat, the toilet will rock and the wax seal will be compromised. In this case the toilet must be shimmed to prevent it from rocking, but the shims can be installed in a manner that will allow the toilet to be level.
Do toilets come with wax rings?
Toilets usually include a wax ring. However, it’s best to purchase a backup wax ring in case of damage during installation. You can also use a wax-free ring. These types of rings fix on the flange, rather than the toilet outlet.
How much should it cost to have a toilet installed?
On average, a standard toilet installation costs between $120 and $230 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $221 to $427.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
What is better wax ring or rubber?
Using a wax-free seal makes clean up easier and there’s less room for error. If you need to remove the toilet base with a wax ring, you’ll need to purchase another ring to reinstall the toilet. When you use a wax-free seal, it’s reusable as long as it’s in good condition.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
Do all toilets fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
