Table of Contents
Turn on your TV. Press and hold the xfinity and Mute buttons together for five seconds until the light at the top changes from red to green. Type the first five-digit code for the TV manufacturer. If the remote light blinks green twice, the code is correct. Aim the remote at the TV, and press the Power button.
How do I pair my Xfinity X1 remote with my TV?
Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.
How do I set up X1 remote?
X1 Settings Overview Press the xfinity button on your remote. Use the right arrow or left arrow button to select the gear icon. Press OK (or center of directional pad) to go to the Settings menu.
How do I program my Xfinity XR15 remote to my TV?
Pair the XR15 Remote to a TV While the TV is on, press and hold the xfinity and Mute buttons on the remote together for five seconds until the remote light at the top changes from red to green. Enter the first five-digit code listed for the TV manufacturer.
How do I reset my Xfinity remote for a new TV?
See instructions for pairing your Xfinity remote and TV Box.To perform a factory reset: Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green. Press 9-8-1. The LED will blink blue three times to indicate that the remote was reset.
Whats the Setup button on Xfinity remote?
There is no setup button on voice-controlled Xfinity remotes. The XR15 and XR16 remotes use vocal commands to change channels or access the content you want. To get your XR15 or XR16 to work with your TV or streaming box, you’ll need to pair the remote with it.
Where is the Setup button on Xfinity remote?
On your remote, press and hold the Setup button. If you don’t have a setup button you can press and hold the Xfinity and Info(i) buttons together. The LED at the top of the remote will change from red to green. Enter 9-9-1.
What are the codes for Xfinity remote?
Want to program your Xfinity remote control? Here’s how! LG 10178, 11265. Panasonic 10051, 10250. Samsung 10812, 10060. Sanyo 10154, 10159. Sony 10000, 11100. Sharp 10093, 10165. Toshiba 10156, 11156. Vizio 11758, 11756.
How do I control the volume on my X1 box?
Balance the box and TV volume: Access the TV Adapter’s or TV Box’s main menu. Select Setup. Select Audio Setup. For the Set volume to optimal stereo option, select Yes to automatically adjust the volume to the optimal level for stereo output. Note: If you select No, your current volume settings will be retained.
How do I get the volume to work on my Xfinity remote?
Press and hold Xfinity and Mute buttons together for 5 seconds until the LED turns GREEN. Using the digit keys on the remote, enter the code shown in the CodeFinder tool found on this page. Test the remote to confirm that it controls your TV Power and Volume functions as expected.
Why is the volume not working on my Xfinity remote?
If your Xfinity remote volume is not working, verify that your batteries work. If they do, try unpairing and repairing your remote or resetting both the remote and tv box. If you’re sure there aren’t any hardware defects on the Xfinity remote, contact Xfinity customer care or replace your device.
How do I reset my Xfinity X1 remote?
1 Factory Reset a Comcast Xfinity X1 Remote Press and hold the Setup button. The LED on the remote will change from red to green. Press 9-8-1. The LED will blink green twice to indicate that the remote was reset.
Why won’t my Xfinity remote turn off my TV?
To turn off the TV Box, you must either press the Power button on the front panel of the box, configure the TV Box to go into Power Saver automatically or simply leave the TV Box on while turning off the TV.
Why is my TV not responding to the remote?
Perform a reset Unplug the TV’s power plug from the wall socket and wait for one minute after the LED light has switched OFF. After one minute only reconnect the power plug. Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON.
What is the Sony code for Xfinity remote?
Sony TV Remote Codes for XR11 Remote: 10810, 11100, 10834, 11685, 11791, 11786, 11400, 11925, 11904, 10011, 11317, and 10353.
Where is SAP button on Xfinity Remote?
Turn SAP On While Watching a Show While watching full-screen video, press the down arrow on your Xfinity remote. Press the left key to move to the SAP button and press OK. When you select the SAP button, you’ll see the Audio Options panel and all available audio tracks for the program you’re watching.
How do I reset my remote control?
Solution 5: Resetting Spectrum Remote to Factory Defaults Press and hold the TV button. While you are still holding it, press the OK button for 1 second and then release both buttons at the same time. Now you have to press and hold the Delete button for 3 seconds. Now your TV remote will be reset to factory settings.
Why won’t my Xfinity remote change the channel?
If your Xfinity remote won’t change channels, try checking for any connectivity issues with your Xfinity remote. Also, check the compatibility of the remote with the set-top box. If that does not fix it, replace the batteries of your Xfinity remote.
How do I program my Xfinity XR2 remote to my Comcast box?
Pair to a TV Box To pair the XR2 Remote with a Non-X1 TV Box: While the TV is on, press and hold the Setup button on the remote for 3 seconds until the All Power button changes from red to green. Enter the first 5-digit code listed for the TV manufacturer. Note: The All Power button should blink twice.
What is Sony TV code?
DirectTV Remote code list for Sony TV. 11100, 10000, 10011, 10080, 10111, 10273, 10353, 10505, 10810, 10834, 11317, 11685, 11904, 11925, 10010,10000.
How do I connect my Comcast remote to my Sony sound bar?
How to Program an Xfinity Remote to a Soundbar Make your Soundbar the Default Output Receiver. Press the ‘Setup’ Button on Your Remote. Wait for the LED Light to Turn Green. Enter Soundbar Manufacturer’s Code. Wait for LED Light to Flash Green Twice. Test the Remote Works.
How do I program my Xfinity remote to my Blu Ray player?
Program Your Remote From the Self Help screen, scroll down to Set Up Remote using the arrow keys on your remote. Choose the correct remote model and press OK. Choose the type of device that you would like to control with your remote: TV, DVD Player, etc. Select the brand of your device.
