Table of Contents
How do you smooth lines in Civil 3d?
To Smooth Feature Lines Click Modify tab Edit Geometry panel Smooth Find. Select the feature line(s) to smooth or straighten. Do one of the following: Press Enter to smooth the lines. Enter Straighten to straighten lines that were previously smoothed.
How do you edit the corridor surface in Civil 3d?
To Edit Corridor Surfaces In the drawing, click the corridor. Click Corridor tab Modify Corridor panel Corridor Surfaces Find. In Corridor Surfaces dialog box, click the Surfaces tab. In the properties table, select the surface that you want to edit. To modify the name of the surface, click the name.
How do I create a corridor profile in Civil 3d?
Exporting Corridor Feature Lines as Profiles Click Home tab Create Design panel Profile drop-down Create Profile From Corridor . In the drawing, select the corridor feature line to export. In the Create Profile – Draw New dialog box, enter the required data.
How do you offset a surface profile in Civil 3d?
Make a profile form surface, look below the dialog box window where you select the surface, there is a button and box to make an offset profile. You can also create an offset alignment, cut profile based on it and project it to the parent alignment profile view to have a dynamic offset value.
How do I smooth lines in AutoCAD?
Enable Smooth Line Display On the command line in AutoCAD, type LINESMOOTHING and set it to On or 1.
How do you smooth in AutoCAD?
Type OPTIONS on the command line. On Display > Display resolution section, increase the value of Arc and circle smoothness.Solution: On the command line in AutoCAD, enter VIEWRES. Select Yes or No for fast zooms. Choose a larger value than the one currently set.
How do you use a corridor section editor?
To open the Corridor Section Editor Select a corridor in the drawing. Click Corridor tab Modify Corridor Sections panel Section Editor . Optionally, you can use the Select A Baseline list to select another baseline for the corridor or click and select an alternate alignment in the drawing.
What is corridor in Civil 3D?
A corridor model builds on and uses various Autodesk Civil 3D objects and data, including subassemblies, assemblies, surfaces, feature lines, alignments, and profiles. The corridor manages the data, tying various assemblies (applied for different ranges of stations) to the baselines and their finished grade profiles.
Where are subassemblies in Civil 3D?
The attachment point occurs at the midpoint of the assembly marker. A Subassembly represents individual components of the proposed cross-section. Subassemblies attach to the left or right side of an assembly’s attachment point. A Corridor is a 3D model of a proposed design based on alignments, profiles, and assemblies.
How do you create an alignment in Civil 3D PDF?
CREATE AN ALIGNMENT USING ALIGNMENT CREATION TOOLS o From the Home Ribbon → Create Design Tab → Alignment → Click Alignment Creation Tools o The Create Alignment Layout dialog box pops up o Give your alignment a name (such as WW1) o Select the type of alignment you wish to create.
How do you make assemblies in Civil 3D?
Click Home tab >> Create Design panel >> Assembly drop-down >> Create Assembly . In the Create Assembly dialog box, for name, enter Primary Road Full Section. Click OK. When the ‘Specify assembly baseline location’ prompt is displayed on the command line, click in the rectangle under the profile views.
How do I add a surface to an existing profile Civil 3D?
From Home ribbon click the Create Design panel, click Profile and choose Create Surface Profile. Expand and select the alignment that was used to create the initial profile view. Once alignment is selected, find and highlight the desired surface in the right Select Surfaces area. Click Add to sample this surface.
How do I smooth out a polyline in AutoCAD?
Enter f (Fit) to create an arc-fit polyline, a smooth curve consisting of arcs joining each pair of vertices. Enter s (Spline) to create an approximation of a spline. Enter d (Decurve) to remove extra vertices inserted by a fit or spline curve and to straighten all segments of the polyline.
Why is AutoCAD not smooth?
Install the latest AutoCAD update (see Install Updates, Add-ons, and Enhancements). Enable hardware acceleration within AutoCAD (see How to enable or disable hardware acceleration in AutoCAD). Disable file management software or test drawings outside of the software to verify this is not slowing down AutoCAD.
How do you refresh lines in AutoCAD?
Select Reload all selected linetypes. Type RegenALL (or REA) in the Command line and press Enter. Your lines should now appear correctly in your drawing.
How do you hide the corridor in Civil 3d?
To hide corridor regions In the drawing, click the corridor. Click Corridor tab Modify Region panel Hide Regions Find. Select the regions to hide. When you are finished selecting regions, press Enter.
How do you see the cross section in Civil 3d?
In the Toolspace, on the Toolbox tab, expand Miscellaneous Utilities Surfaces. Double-click Quick Cross Sections. When prompted for an option, enter 3p. In the drawing, pick two points to specify the left and right extents of the quick cross section view.
How do I get out of the corridor section editor?
Select the View/Edit Options button on the Section Editor tab of the Ribbon. The View/Edit Corridor Section Options dialog will display. Set Adaptive Grid to Off.
How do you view a corridor in Civil 3D?
To view Autodesk Civil 3D objects in the Corridor Section Editor Select a corridor in the drawing. Click Corridor tab Modify Corridor Sections panel Section Editor . Click Section Editor tab View Tools panel Display Objects. In the Display Objects in Section Editor dialog box, specify the objects you want to view.
How do you use subassemblies in Civil 3D?
To insert a subassembly from a tool palette Display the Tool Palettes window. Click Home tab Palettes panel Tool Palettes Find. On the Tool Palettes window, click the desired subassembly. Do one of the following: To add the subassembly to an assembly, select a marker point on an assembly in the drawing.
