Table of Contents
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
How should logs be placed in a fireplace?
The Chimney Safety Institute of America recommends that this layer of logs be placed in a fireplace with the ends facing towards you. These logs should be packed tightly together horizontally so that the fire can be easily transferred between them when the flames reach this layer.
How do you use ceramic logs?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
How do ceramic fireplace logs work?
Gas logs are a stack of ceramic logs that sit inside your existing fireplace. While they will emit some heat, they do not discharge as much heat as a built-in gas fireplace or gas insert. Most of the heat that is generated from a gas log set goes right up your chimney – just like a wood burning fireplace.
Do ceramic logs put out heat?
Providing a beautiful and realistic fire, vented-heater gas logs are made from ceramic fiber that glow and radiate heat.
How do I arrange the logs in my gas fireplace?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
What is the purpose of ceramic logs?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
Do ceramic logs need to be replaced?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
Why are my ceramic logs turning black?
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.
How do you use fake fireplace logs?
Imitation logs are quite different from actual wooden logs. While wooden logs can be stacked within the fireplace, imitation logs can only be burned one at a time. Imitation logs are quite easy to burn. Simply stick one in the fireplace and light it.
How do you clean ceramic fireplace logs?
Here is a step-by-step guide on how to clean and inspect your gas logs: Step 1: Make Sure Gas is Turned Off. Step 2: Disassemble the Fireplace. Step 3: Inspect and Brush. Step 4: Vacuum Away Dust and Cobwebs. Step 5: Polish Glass and Metal. Step 6: Wipe Down Mantle and Hearth. Step 7: Reassemble the Gas Fireplace.
Do fire logs give off heat?
However, firelogs don’t produce as much of one of the most beneficial byproducts of burning wood: heat. The site Science 2.0 explains that the heat content of standard white oak cordwood is about 6,983 BTU per pound, and a 5-pound firelog’s heat content runs from 12,000 to about 14,000 BTU per pound.
Do you get any heat from vented gas logs?
A vented gas log must be used in a regular fireplace, designed to burn a wood fire. Some vented gas logs will give up to 25,000 BTU’s of heat but most don’t give hardly any heat.
Do gas fireplace logs heat a room?
Vent-free gas logs are an inexpensive and efficient way to add extra heat to a room without having to open the damper on your fireplace. These logs use the air from within the room for combustion and then put heat back out into the room.
How do you keep a fire going all night in a fireplace?
11 Ways To Keep A Fire Going In An Open Fireplace Ensure That The Damper Is Fully Open. Warm The Chimney. Maintain The Air Supply. Build The Fire Correctly. Only Burn Wood That Is Dry Enough. Burn Room Temperature Wood. Burn Hardwood Logs. Add A Couple of Logs At A Time.
Can you put too much wood in a fireplace?
Stuffing your fireplace or woodstove with too much wood will likely lead you to damp down the fire, which may cause smoldering and inefficient burning. Some woodstove owners try to achieve overnight burns by closing the damper in their woodstove. Without enough oxygen the fire will generate too much smoke.
How do I arrange my gas fire coals?
‘The coals must not be crammed together, or inserted into the holes in the matrix. A well laid out, generously spaced coal layout will give the best results. When lit the flames should not be hitting the sides of the firebox, if so adjust as necessary. No coals should be directly above a flame port.
How can I make my gas fireplace look better?
Towards a gas fireplace that looks like a ‘real’ fireplace Step 1 | Install the burner bed on andirons with a grate or in a fire basket. Step 2 | Invest in beautiful ceramic logs. Step 3 | Place a fireback against the back wall of the fireplace. Step 4 | Place antique fireplace accessories around the fireplace.
Can you run a gas fireplace without logs?
You CANNOT install vented gas logs in any gas fireplace or gas stove including b-vent (natural vent), direct vent or ventless gas fireplaces. Important Note: Ventless gas logs are NOT legal in California and some other states, cities or municipalities.
