Table of Contents
Tips on Choosing a Faucet Looks aren’t everything. Most people choose a faucet based on looks alone. Spend enough but not too much. Watch the spout height and reach. Choose ceramic valves. Some finishes are tougher than others. Count the holes in your sink. A single handle is more convenient. Pull-down sprayers are better.
How do I know what size kitchen faucet I need?
First, you need to address size as it relates to functionality. Second, to look balanced, your faucet should be in proportion to the sink. A large faucet would visually overpower a small prep sink, while a small faucet might look odd in a large sink and countertop area.
How do I know what faucet fits my sink?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
Do all kitchen faucets fit all sinks?
There are many different kitchen faucet and sink designs available, but they’re not always compatible. Kitchen faucets can have from one to four mounting holes. Three holes are used for the spout and two handles. A fourth hole is typically used for an accessory, such as a soap dispenser or side sprays.
What does maximum deck thickness mean for faucet?
On faucetdirect.com, they specify that it’s the maximum thickness that your countertop can be to install the faucet. They also say that “thick deck installation kits” are avaiable, if your counter is too thick. Like.
How do you tell what size your faucet is?
With the help of a nickel and dime, you can easily determine the size of your aerator. First remove the insert and washer from the inside of the aerator. Set a nickel on top of the aerator, and if it’s almost the same circumference, the aerator is a regular size. If it’s not a regular size aerator, use a dime.
How do I know what size faucet I have?
You can measure your faucet, or use a simple shortcut using coins. If your faucet is roughly the size of a nickel, it needs a regular-size aerator. If your faucet is roughly the size of a dime, it will use a junior-size aerator.
Are all kitchen faucet holes standard?
Since there are many different types of kitchen faucets, there is no standard or typical hole size. The faucet hole size will vary depending on the kitchen faucet you plan to install. Measure the faucet hole size before you shop.
What is the standard size hole for a kitchen faucet?
Hole size = 1 3/8″or 35mm is the worldwide standard faucet hole size.
Are all kitchen faucet holes the same size?
While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.
Can you put a one hole faucet in a three hole sink?
If you’re replacing the kitchen faucet in your existing sink, look underneath the sink to see how many holes it has (usually between one and four). You can install a one-hole faucet in a three- or four-hole sink by adding a deck plate but not vice versa.
Why are kitchen faucets so tall?
Convenience and functionality are two of the main reasons to choose a high-arc faucet for a kitchen, but they also contribute to the overall look of the kitchen in that they’re quite obvious compared to low-arc faucets.
Why do kitchen sinks have 4 holes?
Kitchen Sink Mounting Holes 4-hole sinks allow for a two-handle faucet and a sprayer or soap dispenser. 3-hole sinks allow for two-handle faucets only without accessories. 2-hole sinks allow for a single-hole faucet, and an accessory, like a sprayer.
How far should sink faucets extend?
For ease of use and less splashing, the best faucet extends seven inches into the bathroom sink. Faucets should always have a spout reach of at least five and a half inches. Seven inches, however, gives ample room so that you aren’t bumping against the back of the sink when you wash your hands.
What does Deck Mount mean on kitchen faucet?
Deck-mount faucets attach to the countertop or rest on the sink. Wall-mount faucets attach through the wall and hang over the sink. If you choose a replacement deck-mount faucet, the number of holes on your sink is important.
Should faucet be over drain?
Ideally, the flow of water from the faucet should go down the drain. Don’t forget that the faucet usually sits back either on the sink rim if it’s a drop in or a bit farther back it it’s a deck mount. So watch that. The faucet is the most-used feature in the kitchen.
What does 8 inch spread faucet mean?
On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.
What does a 4 inch centerset faucet mean?
The four-inch measurement for a centerset faucet refers to the center to center distance between the two furthest mounting holes. Centerset faucets have three mounting holes. All faucets with this kind of mounting pattern are measured between the two furthest spaced openings to get the desired measurement.
