Table of Contents
Here’s how to request a new combination or key: Click to email First Alert Support to verify that a spare key or combination is available for your safe model. After Support confirms a key is available, download and fill out the following form: Notarized Statement of Ownership for Safe Combinations or Keys.
How do you open a First Alert safe without key and combination?
Opening a Safe Without the Combination First you must find the safe’s emergency key. Remove the panel that covers your safe’s dial. Once you have removed the dial panel, take a look beneath the dial itself. Insert the emergency key into the emergency keyhole and turn it until the safe opens.
How do I crack my First Alert safe?
Insert your override key (the one with the square top) and while turning the key, take a flathead screwdriver and insert it in the crack of the door and slowly pry it open. Another method is to lay your First Alert safe on the right-hand side and using the override key to open the door.
Are First Alert Safes easy to break into?
Heavy, durable and hard to break into, a well-built burglary safe is normally hidden . First Alert Canada Home Security Safes include cash and security boxes, security screwdriver and insert it in the crack of the door and slowly pry it open..
How do I open my first alert safe with the keypad?
Open the protective cover on the front of the safe to expose the keypad. With the safe in the open position, press the small reset button located on the inside top edge of the door. Enter your new three to eight digit (3-8) passcode followed by the # key.
What is the key number of a First Alert safe?
Where do I find the serial number for my safe? On the bottom right hand corner on the front of the safe or the right wall on the outside of the safe. It is located on a silver sticker (usually 6-10 digits).
How do you open a First Alert safe with a dead battery?
Using your personal Passcode or Emergency Override Key, open the safe door and locate the battery compartment on the back of the door. Press firmly in on the right side of the battery compartment cover and slide to the left to open.
How do you open a First Alert safe 2054f?
Insert the Entry Key into the key lock, turn to the right, and pull the door open. The dial is preset to the fourth (last) number in the combination. The safe door should open when you insert the Companion Entry Key (round top), turn to the right and pull the door open.
How do you call a combination safe?
Dialing a Safe Start by turning the dial to the RIGHT a minimum of 4 turns (this clears the dial of any previous attempts) and STOP on the FIRST number of your 4 digit combination. Turn the dial to the LEFT passing the SECOND number TWICE, stopping on the SECOND number of your combination on THIRD turn.
How do you open a electronic safe with a dead battery and no key?
You can still open your digital safe without a key by restoring power to the keypad so you can enter your passcode. If you’ve forgotten your passcode, you can reset it by using a thin rod or wire to press the reset button on the inside of the door panel.
What do you do if your safe won’t open?
Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.
Where are First Alert safes manufactured?
The manufacturers are in China. Products sold with the brand include carbon monoxide detectors, smoke alarms, fire extinguishers, and other safety products like flashlights and fire escape ladders.
How do you open the combination on a Honeywell safe?
Insert your Honeywell safe key into the lock and turn it clockwise as you turn the handle of the safe’s door. Once you’ve accessed your safe, turn the emergency key counterclockwise, remove it from the keyhole and close the door of your safe.
How do I reset my first alert gun safe?
Press the red reset button located on the inside of the safe (you may need a small apparatus). The red light will blink continuously. Enter your new 4-8 digit passcode and press the red reset button. The green light will blink continuously.
How do you open a key safe?
How to Open a Sentry Safe With a Key Place your Sentry safe on a sturdy surface. Make sure the safe is facing you. The safes can be bulky and a little heavy. Insert the key in the silver lock, which is located under the lid in the middle of the safe. Turn the key to the unlock position. Lift the lid of the safe.
How do you break into a safe without a key?
Here is how you open a safe without a key but an earth magnet: Put your earth magnet in the sock. Place the magnet to the place where the nickel solenoid of the safe is. The solenoid is the mechanism that opens and locks the bolts of your safe. Once you placed the magnet, turn the safe knob, and open it.
What happens when a safe runs out of battery?
If the safe is well designed and manufactured it is not a problem if the batteries run out. They can usually be replaced in time and even if they do run out the safe can be opened by using an emergency key or an external backup battery.
How long does it take for a safe to reset?
Wait for the Lockout Code to Lift If you have been locked out of your safe due to several attempts that were unsuccessful, just wait it out. Read through your safe data and check how long the lockout code will release. Some safes will release after 20 minutes, while some will release after 30 minutes.
Can a strong magnet open a safe?
All you have to do to open up the safe is take your trusty sock and magnet device, then attach it to the safe. There isn’t too much surface area to these safes, and it should be on the front door, so just slide the magnet around using the sock until you’re able to open the safe.
Can digital safes be hacked?
Some consumer safes protected with electronic locks are quite easy to hack using basic techniques. However, one hacker demonstrated at the DEF CON security conference Friday that even high-security rated electronic safe locks are susceptible to side-channel attacks typically used against cryptosystems.
