Table of Contents
How do you make custom tumbler decals?
How to Make DIY Vinyl Decals for Tumblers Step 1: Download the vinyl decal cut files. Step 2: Cut out the vinyl. Step 3: Weed the vinyl. Step 4: Put the vinyl on transfer tape. Step 5: Prepare the surface for the vinyl decal. Step 6: Apply and burnish the vinyl decal onto your tumbler.
What can I use instead of epoxy on tumblers?
Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.
Do you have to sand a tumbler before epoxy?
This is how you’ll seal the vinyl on the tumbler! This time when you remove the tumbler from the cup turner let it set for several more hours to completely cure. The epoxy tumbler should be now be smooth and glittery. Do not sand the tumbler this time!Jul 15, 2021.
Can you put a photo on a tumbler?
Prepare Pictures to Add on Tumbler. Pick out whatever pictures you want, size them, then print them on the glossy side of water slide decal paper. Or you can use a Cricut print then cut feature. Let them dry and then spray a layer of crystal clear enamel over all the pictures.
How do you write on a tumbler?
5 Steps to Applying Decals to DIY Tumbler Cups 1) Clean the outside of the tumbler. Using the cotton balls and rubbing alcohol, wipe the outside of the tumbler to remove any oil and dirt. Briefly let dry. 3) Attach the vinyl decal to a sturdy right angle. 4) Peel off backing. 5) Apply the decal to the tumbler.
Can you make vinyl stickers without a Cricut?
You do not have to have an electronic cutting machine to work with vinyl. You can always cut your vinyl by hand using a pair of scissors or craft knife. However, to make things easier and to get super clean cuts and intricate designs, you will want an electronic cutting machine like a Silhouette or a Cricut.
What kind of paint will stick to stainless steel?
Although virtually any type of paint will bond to a properly prepared stainless-steel surface, a two-part epoxy paint is the preferred coating. It provides durability and an attractive sheen.
How many layers of epoxy should I put on a tumbler?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
Do you have to sand tumbler before painting?
You don’t have to sand them or do anything special! Just pick your favorite color and go for it! It does take some practice, so have patience with yourself and don’t make the first one for someone else. My kids and I have about 10 DIY custom tumblers in the house.
How do you customize mugs on Cricut?
Using the Cricut Mug Press Step 1: Design Your Mug in Design Space. Step 2: Cut Your Design on Infusible Ink. Step 3: Weed Your Design. Step 4: Align Your Design on the Mug. Step 5: Place the Mug in the Mug Press. Step 6: Remove the Mug from your Mug Press. Step 7: Remove the transfer sheet.
Do I need to seal vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
What kind of vinyl do I use for tumblers?
Permanent vinyl is the best kind of vinyl to use for tumbler cups. Cricut Permanent vinyl will last really well. You can put this vinyl through the dishwasher but stainless steel tumblers hold up better if you hand-wash them.
Do you mirror vinyl for cups?
Adhesive vinyl should rarely be mirrored. Most of the time you will cut your design without mirroring and place the material face up on the mat. You should then use transfer tape to put over the top and move the design to your substrate. So, if you are putting a design on the back of a clear plate or on a window.
What is a good substitute for epoxy resin?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. What is this? Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Can I use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
Why is my epoxy tumbler bumpy?
Surface Imperfections This problem can be caused by anything floating/falling into your resin while it cures, resulting in imperfections in the surface. If you are experiencing imperfections that look more like domed bumps in the resin, skip down to #4.
Can you use spray epoxy on glitter tumbler?
To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler!Dec 29, 2018.
