Table of Contents
What is the best way to apply Chalk Paint?
Step by step guide to painting furniture with Chalk Paint® Remove any hardware, such as handles, from your furniture if possible. Give your piece a quick clean with a damp cloth (avoid any harsh chemicals). Stir your chosen Chalk Paint® colour. Dip your brush in, and apply the paint straight onto the furniture.
How do you get a smooth finish with Annie Sloan paint?
Use an Annie Sloan Flat Brush and charge it with Chalk Paint®. If the paint is feeling thick, you can dilute it with a little water. Paint your surface as smoothly as you can, keeping the brush at a 90º angle and feathering the paint as you go.
Do you have to sand before using Chalk Paint?
Chalk Paint® adheres to almost any surface, and there is rarely any need to sand or prime before painting. For the best results, we recommend using a good quality paintbrush like the Chalk Paint® Brushes to apply the paint. Always finish Chalk Paint® with either Chalk Paint® Wax or Lacquer for protection.
How long do I wait between coats of Annie Sloan Chalk Paint?
Annie Sloan, manufacturer of the trademarked Annie Sloan’s Chalk Paint®, recommends users wait a full 24 hours between coats of paint to allow for adequate dry time and product performance. So, be ready to watch that first streaky coat of chalk paint dry for a full day before you add a second coat.
Do you use a brush or roller for chalk paint?
A natural bristle brush with long, flexible bristles is the best choice for chalk paint application. Make one more stroke in the original direction by rolling a thin layer of paint in a unidirectional stroke.
What kind of brush do you use with chalk paint?
The best brush for chalk paint is one with nylon bristles, but you can certainly have a beautiful end result with a synthetic brush. Sanding lightly before applying wax is helpful in getting rid of brush strokes.
Do you sand after waxing chalk paint?
Yes, you can sand it after the wax has been applied! It makes the piece super smooth. And, there you have it! My step by step instructions on how to create a super smooth finish (without brush strokes) using Annie Sloan Chalk Paint!Jan 2, 2018.
How do you get a shiny finish with chalk paint?
If you paint with chalk paint, you need to apply wax or another finish after the paint dries. For a modern finish, I do not use clear wax. Waxing is a multi-step process, applying the wax and then later buffing the wax. It provides a quality result and durable finish, but the sheen is matte.
Do you see brush strokes with chalk paint?
Next, start painting on the chalk paint. Remember to mist the brush before painting and mist the furniture too. Apply a thin coat and then let it dry. If you see any brush strokes sand them away.
How do you prepare a dresser for chalk paint?
To clean your piece of furniture before painting, use a damp cloth and wipe over the surface. For stubborn dirt and grease, use warm soapy water but avoid harsh chemicals. For shiny laminates, use a sanding pad and lightly sand the surface. Wipe away any sanding dust before painting.
What happens if you dont wax chalk paint?
You have to also be careful to apply wax very evenly. What happens if you don’t wax chalk paint evenly is that built-up of too much wax can attract dirt. But a thin layer of wax could allow water to penetrate so be sure to use coasters on pieces that get a lot of use.
What are the pros and cons of chalk paint?
The Pros and Cons of Chalk Paint Pro: No Prep Work. One of the most challenging parts of any painting project is the prep work. Pro: Good Coverage. Con: The Cost. Pro: It’s Water-Based. Pro AND Con: Dry Time. Pro: Durability. Con: You Have to Wax It.
Do you need to stir Dixie Belle Paint?
The longer the lid stays off, the thicker it will get. If you’d like it thinner, no worries, just add a little water and stir. No worries, just leave lid off and it will thicken up. Whatever consistency you desire, Dixie Belle Paint will work for you!.
How long should Dixie Belle Paint dry before waxing?
Apply a VERY thin layer of Best Dang Wax with a cloth or brush over dry Dixie Belle Paint. Allow 15-20 minutes to set, then buff with a clean lint free white cloth. You may distress before or after waxing.
How do you wax after using chalk paint?
You can easily apply wax to your dried chalk paint by wiping it on with a dry cloth and buffing it in. A small amount of wax can go a long way so be cautious when using it. You may need to wax and buff your piece twice to get an even finish. Re-wax every now and then as needed.
Can you apply chalk paint with a rag?
People often ask us if you can “roll” Chalk Paint™ by Annie Sloan onto your piece. The answer is yes, you absolutely can! After your piece is nice and clean, you will need your paint, a paint tray, a velour roller with a low or short nap, Annie’s flat brush, a clean rag and a 220 grit sanding sponge.
Why does my chalk paint look streaky?
Why does my Chalk Paint Look Streaky If your chalk paint is too dry, it is harder to apply smoothly. The first coat of chalk paint always looks a bit streaky and blotchy. If it seems to be applying evenly and isn’t too thick, apply a couple more coats to see if you get a more even, pretty finish.
Are Annie Sloan brushes worth it?
Are they worth the price and why are they pricier? For us, YES, they are totally worth the price! Honestly, they perform better than any other brushes we have used (which trust me we have tried them all!) Keep in mind Annie’s Brushes are pricier because the quality is superior.
