Table of Contents
How to Prepare Old Cedar Shakes for Repainting Scrape any peeling paint chips off the shakes with a scraper. Powerwash the siding to remove any excess dirt or paint with a low pressure pressure washer. Allow the house to dry completely for one to two weeks. Buy primer and paint to finish the job.
What kind of paint do you use on cedar shakes?
Exterior grade acrylic-latex paint is the most dependable finish in terms of protecting cedar.
Is it better to paint or stain cedar shingles?
First, stain preserves the texture, grain and appearance of the wood better than paint. Second, with stain there is no peeling problem since it soaks into the wood. Finally, in most cases stain is actually easier to apply – at least on shingles.
Should I paint my cedar shake siding?
The best answer is based on your home’s current cedar condition. Stain lasts longer and often looks more natural, but can only be applied if cedar is paint-free. Paint offers more protection and can be a good choice for badly worn homes with previous peeling issues from past painting applications.
Can cedar shakes be painted?
Your best bet, at this time, is to paint the cedar shakes before they are installed. There are many ways to do this, but you may find that spraying or dipping the shakes is the most productive method. There are some very good airless paint sprayers that will do this job very quickly.
How do you paint cedar wood?
Allow the washed surface to dry before recoating and apply primer paint to areas of bare wood. After the primer has dried, apply one or two topcoats of paint or solid-color stain. Two topcoats are always better over bare wood that has been primed. These may be applied to Western Red Cedar by brush, roller, or pad.
Do you paint or stain cedar shakes?
Paint Or Stain Cedar Shake Shingles If you have cedar shake shingles as siding on your home, and does not currently have a paint coating on it, do not paint them. Cedar wood shake shingles should never be painted, as they are cut & milled on a bise, meant to sluff off wood as they age.
How do you paint old cedar shingles?
Apply Primer and Paint Using a 4-inch brush, apply an oil-base stain-blocking primer. Work the brush into the overlapped edges and the recesses between the shingles. Let the primer dry and apply a high-quality acrylic latex house paint. If you roll either primer or paint, back brush so all surfaces are protected.
Can you paint cedar posts?
Leaving your cedar unfinished is an option. Silicone stains also deposit silicone on the surface, making it shiny. Once primed, paint the posts with a 100 percent acrylic latex paint. Although priming and painting your posts will make them more impervious to water, the paint is not a preservative like a stain.
How long does paint last on cedar siding?
Cedar siding needs to be repainted every 5-7 years, but if you take some special precautions, you can get up to 10 years from one paint application. In order to do this though, you will need to ensure that you are properly preparing the surface and considering all the environmental factors.
How do you fix peeling paint on cedar siding?
Repair the Peeling Siding Scrape off all the peeling bits. Sand the remaining paint to a feather edge with 60-grit paper. Kill the mildew on the old paint with a mix of diluted bleach and dish soap. Rinse thoroughly by using a hose or even a power-washer on low setting.
How much does it cost to paint cedar siding?
If you would like to paint or stain your cedar siding, the cost ranges from $2 – 4 per square foot, depending on size, complexity, number of stories, type of siding, etc. Most homeowners report spending about $3,100-4,500 to paint 1,500 sq. ft. of cedar lap siding.
Can I paint over cedar siding?
Acrylic-based paint is recommended when painting cedar siding as it looks great and offers the protection the natural wood needs. Acrylic paint also has strong adhesion abilities and is even mildew-resistant, making it a perfect fit.
Should you stain cedar shakes?
Staining cedar shingles not only enhances their beauty but also fortifies them against threats posed by the elements. To protect new shingles, apply a penetrating stain. Stain soaks in and protects the wood from the weather, and it won’t crack, peel, or chip.
Can you paint new cedar?
First, painting freshly milled Cedar requires a paint stain, unless a 100% acrylic exterior primer is used first, thereby allowing a 100% solid acrylic paint to be used as final finish coats. Using a stain paint, only fade becomes an issue, wearing thinner over time, needing to re-coat.
What can I do with old cedar shakes?
Many local churches, Habitat for Humanity, and worldwide organizations will take your old shakes for a host of projects. You can also use online tools like FreeCycle to unload your roofing materials.
How do you paint rough saw cedar?
Start by spraying off surface dirt with water and then scrubbing with bleach to kill any mold or mildew. Then use a wire brush to remove any chipping pieces of wood or peeling paint. Sand any spots that are unusually rough or damaged. Repair loose boards and fill in holes and cracks with wood putty.
Can you sand cedar shakes?
You can sand them with 60 grit or use a wire wheel on a drill.
