Table of Contents
Learn how to paint the outside of a freestanding or clawfoot tub with these steps. Remove the legs and other hardware. Sand the outside of the tub. Clean the tub. Tape off everything you don’t want painted. Prime the tub. Paint the tub. Reattach hardware and install tub.
Can you paint the outside of a claw foot tub?
Prime: Thoroughly clean the tub’s exterior, then apply a quality latex primer with a foam roller and let dry to create a smooth surface. Apply: Paint at least two coats of exterior-grade latex paint in a satin or semigloss finish onto the exterior using a foam roller.
How do you paint the outside of a cast iron tub?
Remove Rust. The first thing you need to do is make sure your bath is free of rust. Prepare the surface. After removing the rust the surface needs to be degreased using sugar soap. Prime the surface of the bath. Before applying a coloured paint you will need to use a metal primer. Apply an undercoat. Paint your bath.
What kind of paint do you use on a cast iron tub?
For a cast-iron or fiberglass tub, you can use acrylic urethane enamel, which may already come mixed for you, or you may have to mix it it, just depending on what kind of kit you purchased. For fiberglass tubs, you can also use a two-part epoxy paint instead of the acrylic.
What kind of paint can I use to paint my bathtub?
Bathtub paint should be durable, water-resistant and specifically chosen with your bathtub in mind. The best bathtub materials for painting are cast iron and acrylic, though you can paint fiberglass bathtubs too.
How do you paint claw feet?
Oil or urethane-based paints work best in this situation. They go on smooth, bond well to the primer and metal and last longer in humid areas than acrylic paints do. Give the feet a minimum of two coats of paint using a nylon-bristled brush. Allow the paint to dry completely between each coat.
What kind of paint do you use to paint the outside of a clawfoot tub?
Paint the tub. Oil based paints or exterior paints are a good choice for withstanding the damp bathroom. I used this exterior paint in a satin finish. Brush, roll, or spray the paint, careful to avoid brushstrokes. Once dry, sand lightly (if needed) and clean before applying a second coat of paint.
Can you repaint a cast iron tub?
Painting over a cast iron tub can give new life and style to any bathroom. Whether the bathtub is rusted and peeling or simply in need of a refresh, it’s important to plan each step in the process.
Can you use rustoleum on cast iron tub?
Apply an oil-based, rust resistant primer, such as Rust-Oleum, to the cast iron bathtub. The primer will help the paint properly adhere to the cast iron surface and prevent rust that can damage your tub. Allow the first coat of primer to dry and apply a second coat of primer.
How do you remove rust from the outside of a cast iron tub?
Make a paste using baking soda and a little water. Spread the paste on the areas of your tub that have rust stains. Let this sit overnight. The next morning, gently scrub the paste away with the microfiber cloth. Rinse any remaining baking soda from the tub. Repeat as needed.
What paint is best for cast iron?
You can paint wrought iron with exterior-grade enamel paint. Rust-containing paint containing a direct-to-metal ingredient is the best choice for best results. A chip can be caused by ordinary exterior paint. Using a long, smooth brush, apply the paint evenly.
Is it worth refinishing a cast iron tub?
The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a homeowner to remodel a bathroom May 13, 2021.
How much does it cost to refinish a cast iron tub?
How much does it cost to refinish a cast iron tub? For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new.
What do you do with old clawfoot tubs?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.
How much does it cost to refinish a clawfoot tub?
The average cost to refinish a clawfoot tub is $300 to $650, depending on the size and condition. Clawfoot tub issues such as erosion, rust, pinholes, scarring, lead paint, or chips need to be addressed before reglazing. Refinishing takes 4 to 5 hours and typically comes with a 3 to 10-year warranty.
Can you paint the outside of a bathtub?
Yes, bathtubs can be painted with a near-new finish with a little elbow grease. You just need to make sure you have the right equipment and tools such as an epoxy primer and resin finish. Are there bathtub painting kits? There are a lot of DIY bathtub painting kits available.
