Table of Contents
How do you hang Christmas lights on siding?
OPTION 1 – Siding Hook Hang a vinyl siding hook on your house. This is the most efficient method. Slip the top of the hook underneath a piece of siding and wiggle it until it “snaps” into place. This hooks it onto the bottom of the siding.
How many feet of Christmas lights do I need for my house?
When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights. Add another 10 to 12 feet for every awning you plan to light. If you have the time and patience, you can measure your eaves and awnings with measuring tape to get the most precise necessary length of string lights.
How do you hide Christmas lights between Windows?
Wrap the strand along one side and across the top, if long enough, until it is taut. Enlist a friend’s help to make the process a little more manageable. Remove the adhesive backing from the clip at the end or bottom of the light strand, pressing it in place along the corner of the window or door frame.
How do you hide extra Christmas lights?
What am I supposed to do? Unfortunately, there isn’t too much that can be done at the end of a run if there are a few leftover inches/feet of Christmas light strings. Wind them up, secure the coil with electrical tape and tuck the rest of the light string out of the way. Wire ties can be handy at times like this.
How do you hang Christmas lights on a house without gutters?
Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.
How do you hang Christmas lights on a gutter without a ladder?
There are a few ways to hang Christmas lights without a ladder. The first is a simple solution, a light- hanging pole. To use these poles, you attach the clip to the lights then place the clip in the pole’s grip. Then, you simply extend the arm and hook the clip over the gutter.
How do you attach string lights to a house?
How to Hang Outdoor String Lights Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
Will Christmas lights melt siding?
However, adding lights to your roof, siding and windows can damage your home, leaving behind nasty staple scars and holes. It’s time to decorate smart.
What’s the difference between C9 and C7 bulbs?
Short Answer: C7 bulbs are about 1.5 inches tall and have E12 bases, C9 bulbs are roughly 2.25 inches tall and have E17 bases. Both fit into cords that are commonly wired in parallel and are a favorite of both professional and residential Christmas light installers.
How much does it cost to have your house professionally decorated for Christmas?
How Much Does It Cost for Someone to Decorate Your House for Christmas? On average, homeowners spend $400 to have someone professionally decorate and install Christmas lights. For homes higher than one story, the cost can go up to $1,130.
Should you wrap Christmas lights with electrical tape?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
How do you hang string lights around a window?
Cup hooks are ideal if you have no gutters. You can simply screw them into your wall and hang most silhouettes or strings of lights. They are very useful if you’re going to use fairy lighting along the bottom or top of your window. If you don’t want to attach anything to your wall, use wire suckers.
How do you hang Christmas lights without nails?
If you don’t want to use nails, try attaching the lights to adhesive hooks or clips. You might also be able to get them to stay up with a few pieces of transparent tape spread out along the string. Picture hooks, nails, or heavy-duty staples will also work if you don’t mind making holes in the wall.
What is a Gilbert plug?
Male Gilbert plugs (also known as vampire plugs) are required hardware when working with 500 and 1000 foot spools like these: C9 Cords and Spools. C7 Cords and Spools.
What do you do if your Christmas lights are too long?
The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with the lights unplugged. Then, simply cap each of the two cut wires with a wire connector.
How do you put Christmas lights on the roof peak?
Climb higher along the peak to attach the next lights on the strand. Go slightly higher on your roof, and pull the light strand tight so it forms a straight line rather than bowing in between the clips. Slide clips underneath your shingles and set the bulbs in the rings until you’ve gone to the top of the peak.
How do you hang patio lights on gutters?
For at least one side of the lights, you can use gutter hooks to hold the outdoor string lights. These are S-shaped hardware you can purchase at any home supply store (our favorite decorative ones are here). You can hang one end from the lip of your gutter, and thread the string light through the other end. Voila!.
