Table of Contents
Find the indented corner; 2. Plant your thumb firmly as if to pry off the lid on top. 3. Pull up.
How do you mix OxiClean in a spray bottle?
Use a clean spray or squirt bottle. Mix 1 scoop (2 tablespoons) with 1 pint of warm to hot water. Mix or shake thoroughly. Product will remain active for six hours.
Does OxiClean come sealed?
No, it does not have a seal under the cap.
How do you use OxiClean spray?
Wash item with your regular detergent.Pre-treat tough clothing stains Apply. Spray directly onto the stain until saturated. Rub. Rub into fabric and let stand for up to 10 minutes. Wash.
How do you dissolve OxiClean?
In the Washing Machine Let your washing machine fill with water to the desired level. Do not add clothing yet. Add 1 scoop of the powder along with your regular detergent for a small load. Allow the powder to dissolve completely in the water. Add your clothes and wash as usual.
How do you use OxiClean in HE washers?
Oxiclean can be used directly with a high efficiency laundry detergent. Add 1-2 spoons of Oxiclean after mixing the detergent in the water. Simply, it will clean every stubborn stain on your clothes. Also, you can use OxiClean in the front load and top load option of your HE washer.
Can you wash clothes with just OxiClean?
Clean your laundry with OxiClean. Unlike chlorine bleach, OxiClean uses oxygen ions to safely clean and brighten clothes without risk of damaging colored clothing. OxiClean has enough cleaning power to use alone in the washing machine, allowing you to eliminate your basic laundry detergent.
How do you use OxiClean white revive?
Add White Revive™ to every load to remove stains and maintain brilliant whites. Add OxiClean™ and detergent before adding laundry.Make whites even brighter! Mix. 1 scoop of OxiClean™ per gallon of the warmest water recommended by the garment care label. Dissolve completely and submerge clothing. Soak. For 6 hours. Wash.
How do I pre soak with OxiClean?
Keep your white clothes white and bright Mix. Mix 1 scoop of OxiClean™ White Revive™ per gallon of the warmest water recommended by the garment care label until the product is fully dissolved. Soak. Soak 6 hours for best results. Wash.
When should you not use OxiClean?
OxiClean’s manufacturer suggests that it should not be used on the following fabrics: wool, wool blends, silk, silk blends, leather, or on fabrics labeled dry clean only.
How do you take OxiClean?
Remove tough clothing stains Fill. Scoop to Line 4 per gallon of water. (Follow instructions on package.) For some surfaces, like grout, a more concentrated paste may be used. Apply. Apply using a cloth, sponge, brush, or by pouring solution directly onto surface. Let Stand. Let stand 5–30 min. Scrub as needed. Rinse.
How do you open an OxiClean spray bottle?
At the top of the bottle, above the cap and just under the spray trigger, there is a green button. Push it in and the bottle unlocks.
Does OxiClean leave residue?
It takes really, really hot water to get it to dissolve very well and it is difficult to remove the residue left over from the crystals. If used it must be thoroughly rinsed or there will be a white residue left everywhere it was used.
Can you leave OxiClean spray on clothes overnight?
Can be used on all washable whites and colored fabrics. For fabrics prone to color change, do not let stand longer than 5 minutes. Treat up to 7 days before washing. Do not use on silk, wool, leather and fabrics labeled dry clean only.
How long can you soak something in oxyclean?
Submerge stained items in solution after dissolved. Soak 1-6 hours depending on severity of stain, some stains may require more time to soak. For best results, soak for 6 hours.
Why is my OxiClean not dissolving?
Water Temperature is Too Low If running a short wash cycle with cold water and a powder detergent, some of the powder might not completely dissolve during the wash cycle. Otherwise, mix the detergent in with some hot water and allow it to dissolve, then add it to the cold water filling the washing machine.
How do you remove OxiClean stains?
Make your own oxi-clean using 1/2 cup baking soda, 1/2 cup peroxide, 1 cup warm water. Mix in a jar and shake well. Add it to your regular load, or pre-soak for the night. Works really well on stains!.
Does OxiClean dissolve in cold water?
The manufacturer says that Oxi-Clean works best in warm to hot water, so when you’re washing with cold water, first dissolve Oxi-Clean in 16 ounces of warm-to-hot water, then add to the cold water.
Can I put OxiClean in my front load washer?
If you have a front-loading washing machine, we recommend adding the OxiClean to the drum before adding the laundry and not mixing it with the detergent in the dispenser. Be sure to also follow your machine manufacturer’s guidelines. 1 of 2 found this helpful.
Can I mix OxiClean with Tide?
A: OxiClean is a detergent itself and would not need to be mixed or added with other detergents.
Where do I put OxiClean in my washer?
Add Oxyclean directly to the empty tub of the front load washer, according to the manufacturer’s prescribed amount, as another option. Load laundry, add laundry detergent, choose cleaning cycle and start washer.
Can you mix OxiClean and Dawn dish soap?
probably at least a cup of the Oxy Clean and Biz, ½ – ¾ cup of Cascade and ⅓ cup of Dawn. if you are using a larger container, use more soap. then, mix it all up. let all the soap crystals dissolve in the warm water.
Can you use OxiClean on black clothes?
There’s no need to presoak with this effective clothing stain remover. Continue to use this fabric stain remover on all your dark color laundry loads to help keep your dark clothes dark, wash after wash. OxiClean offers a wide array of products to fit all your stain removal needs.
Can you hand wash with OxiClean?
OxiClean is a dynamic cleaner that can be used to remove stains from various things around your home. Dilute the OxiClean with water and then place the mixture directly on the stain. Let it sit for 10 minutes before you place the item in the wash. Soak hand-washed items in OxiClean and water.
