Table of Contents
Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
Why won’t my bathtub drain open?
Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage. Feed the linkage back into the overflow hole and let the weight fall freely.
What can I use if I don’t have a drain wrench?
Short of a plug wrench, the best substitute is a set of needle-nose locking pliers. The pliers need to be small enough to reach into the drain and through the cross. Once the locking pliers are secured, you use a pair of standard pliers to turn the locking pliers and loosen the drain.
How do you remove tub drain with pliers?
To remove a push-pull stopper, set it in the open position and turn the knob counterclockwise with one hand while holding the body of the stopper in the other. For increased leverage, hold onto the body with a towel and use a pair of pliers to turn the knob. For the lift-and-turn, set the drain to open.
How do you unclog a tub with standing water?
What you will need to do Pour 1 cup of water down your drain. Put the half cup of baking soda down the drain. Mix in the vinegar with your second prepared cup of water. Pour in the vinegar/water mixture down the drain with the added baking soda – Things will begin to bubble/fizz, this is good, it means things are working!.
How do you unblock a bath with water in it?
Use a plunger Use enough water in the bath or shower tray to submerge just the plunger head. Plunge with a vertical up-and-down motion, keeping the handle straight and vertical. After 20 seconds, take a look at the results. Repeat this process a couple of times until you see some results.
How do I unclog a drain with standing water?
Pour 1/2 cup of baking soda into the clogged drain. Follow that with 1 cup of vinegar. Baking soda and vinegar dissolve grease and oil. Let the clogged drain sit undisturbed for 15 minutes.
Do you need a drain wrench?
Remove the Drain Basket Once you have removed the drain stopper, you will see the drain basket (also known as a drain flange) in the drain opening. The drain basket will have a metal crossbar at the bottom. To remove the drain basket, you will need either locking pliers or a tub drain wrench.
What is the best tool to unclog a tub drain?
A plunger is one of the most popular tools to prevent bathtub clogging. How successful you are will depend on the nature of the clog as well as the design and size of your drain. Take a plunger and add some water to the tub before you start to plunger vigorously.
What are the different types of bathtub drain stoppers?
The most common types of bathtub drain stoppers are lift-and-turn, push-and-pull, pop-up, toe-touch, flip-it, and trip lever. Identifying which type you have will help you when it becomes necessary to fix or replace your drain stopper.
Can you put Drano in a tub with standing water?
As a rule, never pour Drano into an area with standing water. In the drain system, certain kinds of bacteria can be beneficial—good bacteria will gradually break down organic material. If you pour chemicals that kill bacteria down the drain, you’re ultimately hurting your drains.
What is the best drain opener for standing water?
Best Overall: Drano Max Gel Clog Remover Its thick formula cuts through standing water, allowing it to quickly dissolve any clogs, including those caused by hair and soap scum. Reviewers write that Drano Max “works miracles,” eliminating clogs caused by years of hair build-up and other tough plumbing problems.
Why is there standing water in my bathtub drain?
Clogged Shower Drains & Leak Repair. Shower water which drains slowly – or doesn’t drain at all – is called ‘standing water’, and it’s a sure sign that your shower drain is clogged. A clogged shower drain could be caused by anything from a small blockage to a major obstruction in your main sewer line.
How can I unblock my bath without a plunger?
How to unblock a sink without a plunger Add baking soda and vinegar. Try a common hangover cure. Pour in a little biological washing powder. Insert a long wire. Unscrew the U-bend and clear out the blockage by hand.
Will pouring hot water down a drain unclogged?
If you have metal pipes, you can try to loosen the clog with hot water—very hot. Pouring a pot of boiling water directly down the drain into the trap may dissolve the clog, especially if it consists of soap scum or grease. Hot tap water won’t do the trick—it has to be boiling water.
Can you use vinegar and baking soda to unclog a drain?
Drop in 1/2 cup of baking soda down the drain. Pour in 1 cup of vinegar, cover the drain with a plug and let sit for 10 minutes – you will hear fizzing. Rinse with more hot water.
Does bleach and hot water unclog drains?
Although 3/4 cup of bleach followed by a thorough flushing of hot water can be used to deodorize and sanitize drains, it won’t help a clog. It’s ineffective to use bleach to clear a clogged drain because it won’t eat through the hair, washcloth bits, toothpaste and other matter that gets trapped inside pipes.
Why won’t my pop up plug stay down?
Adjust the nut. If the stopper moves as it should but doesn’t stay put, all you need to do is tighten the nut (turn it clockwise). If the action is too stiff, loosen the nut a little. Check the action and adjust until it feels about right.