Table of Contents
Instructions Remove the Toilet. Remove the toilet from its current location. Gain Access. Remove the Toilet Flange. Cut the Toilet Bend. Position the New Drain Location. Run the New Drain. Install the Drain Stub-Out. Run the Water Supply Lines.
Can a toilet waste pipe be moved?
There is usually a vertical waste water pipe under the toilet that uses gravity to move wastewater away. For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.
How much does it cost to move a toilet drain?
The national average materials cost to move a toilet drain plumbing is $164.13 per line, with a range between $153.56 to $174.69. The total price for labor and materials per line is $746.11, coming in between $670.85 to $821.36.
How far can you move a toilet drain?
However, you can also move the toilet to a certain extent without having to change the waste line and stack. If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as 10 feet from your stack, if the diameter of the waste line is 4 inches.
Is it expensive to relocate a toilet?
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.
Can you swap a toilet and sink?
You can potentially rearrange fixtures and still make use of the existing plumbing. For instance, you can have your toilet and your sink swap places. You have cold water running to the existing toilet area, which fills the tank in the back.
Is it possible to move a toilet in a bathroom?
Moving a toilet is not a straightforward weekend DIY job, but it is very doable when you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.
Can you move a waste pipe?
To prepare for moving a waste pipe to a new location, you must always start by shutting the water off to the home. You should also already have a good idea of your new layout and know where your waste pipe needs to be moved before you start the job.
How many toilets can you put on a 3 inch line?
As a horizontal branch 3″ is good for 20 DFU’s or 4 bathroom groups.
How far can toilet be from soil pipe?
The furthest the toilet would be away from the pipe is 2metres due to the size of the bathroom. I’d also have to keep all pipe work above the concrete floor and accessible in some way in case future plumbing work is needed.
How hard is it to move a toilet location?
Moving a toilet is not so much about moving the actual fixture—in fact, installing a toilet is a simple job that takes less than an hour—as it is about moving the drainage and the water supply plumbing to the new location. Once all of the plumbing is in place, installing the toilet is a relatively easy task.
Can you move a toilet to a shower drain?
If you are remodeling your bathroom and find that the shower will be installed over the location of the previous toilet, you can simply change the toilet drain to a shower drain.
Can you put a toilet anywhere in your house?
On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. In the past, many homeowners have had the idea of their dream bathroom crushed because the location was simply too far away from the main drain.
How many inches does an offset toilet flange move?
The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank. It looked like it was trying to participate in the activities of the bathroom rather than sit quietly until needed.
How far does a toilet flange need to be from the wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
How do you move a toilet flange to the wall?
Install the Offset Flange Positions the offset flange so that the bent end moves the flange opening closer to the wall. Make sure the back of the offset flange connects snugly with the drainage pipe. Check to make sure that the flange’s opening is sitting flush and even against the bathroom floor.
Can you put a toilet where a sink is?
The Toilet If it has a 3-inch outlet, however, it must be located within 6 feet of the stack for this to be possible. The most common way to work around this is to connect the toilet waste line to a sink drain, and allow that drain to function as a wet vent. In this case, the sink must be within 6 feet of the toilet.
Does the toilet have to be next to the shower?
A minimum clearance in front of the toilet of at least 21 inches. This is required for all your bathroom fixtures, including the shower, vanity or sink and bathtub. A minimum distance from the center of the toilet to both side walls of 15 inches.
