Table of Contents
Instructions Remove the Toilet. Remove the toilet from its current location. Gain Access. Remove the Toilet Flange. Cut the Toilet Bend. Position the New Drain Location. Run the New Drain. Install the Drain Stub-Out. Run the Water Supply Lines.
Is it hard to move a toilet drain?
Moving a toilet is not a straightforward weekend DIY job, but it is very doable when you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.
How far can you move a toilet drain?
However, you can also move the toilet to a certain extent without having to change the waste line and stack. If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as 10 feet from your stack, if the diameter of the waste line is 4 inches.
Is it expensive to relocate a toilet?
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.
How much does it cost to move a toilet drain?
The national average materials cost to move a toilet drain plumbing is $164.13 per line, with a range between $153.56 to $174.69. The total price for labor and materials per line is $746.11, coming in between $670.85 to $821.36.
Can you move toilet location?
Moving the toilet is not a change to be taken lightly. But if needed, it can be accomplished with substantial plumbing work and a great deal of peripheral work, such as opening up a floor or ceiling, rerouting pipes and drain flange, and re-installing the toilet and other fixtures.
Can you move a waste pipe?
To prepare for moving a waste pipe to a new location, you must always start by shutting the water off to the home. You should also already have a good idea of your new layout and know where your waste pipe needs to be moved before you start the job.
How many toilets can you put on a 3 inch line?
As a horizontal branch 3″ is good for 20 DFU’s or 4 bathroom groups.
Can you swap a toilet and sink?
You can potentially rearrange fixtures and still make use of the existing plumbing. For instance, you can have your toilet and your sink swap places. You have cold water running to the existing toilet area, which fills the tank in the back.
How far can toilet be from soil pipe?
The furthest the toilet would be away from the pipe is 2metres due to the size of the bathroom. I’d also have to keep all pipe work above the concrete floor and accessible in some way in case future plumbing work is needed.
Can you move bathroom plumbing?
On average, it costs somewhere between $500-$1,000 to move a plumbing fixture around three feet or more. This varies, of course, depending on if your plumber needs to move anything around to connect to your drain, vent, or water lines.
Can you move a toilet to a shower drain?
If you are remodeling your bathroom and find that the shower will be installed over the location of the previous toilet, you can simply change the toilet drain to a shower drain.
Is it expensive to move a toilet UK?
Plumbing Relocation Cost Moving plumbing fixtures for a bathroom will likely cost you between £700 and £900. This may involve rerouting plumbing pipes to adapt for a new bath, sink, or toilet.
How hard is it to move a toilet in a basement?
Moving a toilet isn’t so much about moving the usual fixture. Actually, installing a toilet is a simple job that takes less than an hour as it’s about moving the drainage and the water supply plumbing to the new location. Once all of the plumbing is in place, installing the toilet is a relatively simple task.
How do you move a cast iron toilet?
How to Move a Cast Iron Toilet Drain Install a new PVC toilet flange in the floor at the new location of the toilet. Drill a 5-inch hole in the floor using a drill and hole saw at the flange center mark you made. Cut the cast iron toilet drain with a cast iron snapping tool.
How many inches does an offset toilet flange move?
The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank. It looked like it was trying to participate in the activities of the bathroom rather than sit quietly until needed.
How far does a toilet flange need to be from the wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
How do you move a toilet flange to the wall?
Install the Offset Flange Positions the offset flange so that the bent end moves the flange opening closer to the wall. Make sure the back of the offset flange connects snugly with the drainage pipe. Check to make sure that the flange’s opening is sitting flush and even against the bathroom floor.
How do you cover toilet pipes?
If you don’t want to go to the house of boxing in your pipes or building fake walls, then a much simpler (and cheaper) way of hiding the pipework in your bathroom is to use decorations. Decorations can be as simple as winding some fake flowers or ribbons around the pipes or using rope to obscure them.
Can you move a toilet to an inside wall?
Generally, you can install a toilet on an internal wall as long as there is enough room underneath the floor to run the waste line to the mainline. If there is enough room, the only other requirement is that you have a wall with the proper structural studs in it and cavity space for the piping.
