Table of Contents
3 Tips for How to Move a Pool Table Without Taking It Apart Use Dollies. If you don’t need to take the pool table apart, you may be able to move it through the use of dollies. Use Pool Table Lifts. Another option to help move a pool table instead of a dolly is a pool table lift. Use Furniture Sliders.
Can you move a slate pool table without taking it apart?
You can move a pool table without taking it apart with enough helping hands, but it isn’t good for the table. If the table has a three-piece slate, the slate can shift when the table is moved, causing it to become misaligned at the seams. Inevitably, you will need the table re-leveled.
Can you turn a pool table on its side to move it?
Once the pockets, rails and slates have been removed, you can move on to the main body and legs of the pool table. All you have to do is remove each pool table leg from the main structure. To make this easier, you may need to turn the main body of pool table on its side or upside-down.
How do you transport a slate bed pool table?
Dismantle the pool table for an easier move Remove corners and side pockets. The corner pockets can be removed with a staple remover and/or screwdriver. Remove the rails. Next, the bolts that hold the rails in place can then be removed. Take off the felt. Unscrew the slate. Remove the table legs.
Can you lift a pool table?
When you need to move the pool table across the room, the best method to carry out the task is the use of a pool table lift. Another way it can be moved is by using dollies. Since you’re not passing through a door, there’s no need to disassemble the pool table.
How much should it cost to move a pool table?
The average cost of moving a pool table is $369, and prices typically range from $200 to $600. Many factors can affect the overall cost of moving a pool table.
How do you move a pool table without disassembling it?
3 Tips for How to Move a Pool Table Without Taking It Apart Use Dollies. If you don’t need to take the pool table apart, you may be able to move it through the use of dollies. Use Pool Table Lifts. Another option to help move a pool table instead of a dolly is a pool table lift. Use Furniture Sliders.
How heavy is a 1 piece slate pool table?
One piece slates weigh approximately 450 pounds. They are difficult to maneuver when refelting your pool table. They are more difficult to move through hallways, narrow doorways and corners.
How do you transport a billiard table?
Take off the felts to ensure safety when transporting the pool table. Take out the staples carefully and fold it well to avoid any wrinkles. Pull the felt backwards cautiously if the felt is glued to the tabled and not stapled. Slate is the heaviest piece on the table, and hence you need extra hands to unscrew it.
How fragile is pool table slate?
Although pool table slate is very strong and can withstand pool balls being on it, it is a very fragile material, and a tiny crack or chip can ruin the entire piece of slate (or require a repair). This is why it is important to be extremely cautious when you move a pool table to not damage the slate.
How heavy is a 7ft pool table?
The average pool table weights for slate bed pool tables are: 6-Foot Table – 500 Pounds. 7-Foot Table – 700 Pounds. 8-Foot Table – 1,000 Pounds.
Can a pool table be put upstairs?
Absolutely. Assuming your room is up to building code standards of course. Some of the homes that we’ve installed pool tables in upstairs have had floors that have flexed a bit. With all three pieces of slate on top of the cabinet, we’re talking about over 500 pounds of weight on a standard size pool table.
Are slate pool tables Better?
It is ideal for pool tables because it naturally splits into wide, level pieces, and can be easily ground and polished into a perfectly flat surface. While heavier and more expensive than wood, slate ensures that the play surface remans smooth and level.
How much does it cost to Refelt a pool table?
The average cost to refelt a pool table is $366 depending on the table’s size and the quality of the fabric. Installing new felt on a 7 or 8-foot pool table costs $265 to $500, and $280 to $550 on a 9-foot table. Some refelting services charge $100 less if you buy your own felt.
How hard is it to take a pool table apart?
There’s a good chance that you’re going to need to take it apart and put it back together. Standard pool tables are incredibly large and heavy, making it pretty difficult to move them in one piece—even for a professional moving company.
How do you move a pool table across the country?
Choose the Right Method for Moving a Pool Table to Another House. If you are transporting your item from one room to another, you can do it by using four dollies. Lift each end of the item one by one, placing the dollies under the leg, but make sure to brace the dollies to prevent the bulky item from rolling.
How thick is slate on pool table?
The modern slate thickness for most 7–8′ American pool tables is 3/4″ and one solid piece. One-inch slate in three sections is common in older 8′ tables. The Billiard Congress of America requires professional size 9′ tables to have 1″ slate or thicker with at least a 3/4″ wooden backing frame.
