Table of Contents
Can I move a pool table without taking it apart?
You can move a pool table a short distance without taking it apart as long with the help of several people and furniture sliders, but it could cause damage to the table and require the bumpers to be realigned, and the slate re-leveled. We recommend hiring professionals.
How do you lift a pool table?
This method only needs finance to be carried out. Once you have the pool table lift, slide it under the center of the table. Raise the lift by pulling the lever so that it will raise the pool table above ground level. The heavy-duty wheels of the pool table lift roll the pool table to your preferred location.
Can you turn a pool table on its side to move it?
Once the pockets, rails and slates have been removed, you can move on to the main body and legs of the pool table. All you have to do is remove each pool table leg from the main structure. To make this easier, you may need to turn the main body of pool table on its side or upside-down.
How heavy is a 8-foot pool table?
The average pool table weights for slate bed pool tables are: 6-Foot Table – 500 Pounds. 7-Foot Table – 700 Pounds. 8-Foot Table – 1,000 Pounds.
How do you move a slate pool table without taking it apart?
3 Tips for How to Move a Pool Table Without Taking It Apart Use Dollies. If you don’t need to take the pool table apart, you may be able to move it through the use of dollies. Use Pool Table Lifts. Another option to help move a pool table instead of a dolly is a pool table lift. Use Furniture Sliders.
How much does it cost to move a pool table?
The average cost of moving a pool table is $369, and prices typically range from $200 to $600. Many factors can affect the overall cost of moving a pool table.
How do you transport a slate bed pool table?
Dismantle the pool table for an easier move Remove corners and side pockets. The corner pockets can be removed with a staple remover and/or screwdriver. Remove the rails. Next, the bolts that hold the rails in place can then be removed. Take off the felt. Unscrew the slate. Remove the table legs.
How heavy is a 1 piece slate pool table?
One piece slates weigh approximately 450 pounds. They are difficult to maneuver when refelting your pool table. They are more difficult to move through hallways, narrow doorways and corners.
Should I put a rug under pool table?
It’s recommended that you put an area rug under the table that is big enough for all four legs to be on the rug to keep the table from sliding. On hardwood or tile, an area rug can both protect your flooring from stray balls as well as prevent any small possibility of your table sliding under heavy pressure.
How much does it cost to Refelt a pool table?
The average cost to refelt a pool table is $366 depending on the table’s size and the quality of the fabric. Installing new felt on a 7 or 8-foot pool table costs $265 to $500, and $280 to $550 on a 9-foot table. Some refelting services charge $100 less if you buy your own felt.
How fragile is pool table slate?
Although pool table slate is very strong and can withstand pool balls being on it, it is a very fragile material, and a tiny crack or chip can ruin the entire piece of slate (or require a repair). This is why it is important to be extremely cautious when you move a pool table to not damage the slate.
How long does it take to disassemble a pool table?
Take your time when reassembling your pool table so that it’s all done correctly—you’ll probably need about two to three hours.
Can a pool table be put upstairs?
Absolutely. Assuming your room is up to building code standards of course. Some of the homes that we’ve installed pool tables in upstairs have had floors that have flexed a bit. With all three pieces of slate on top of the cabinet, we’re talking about over 500 pounds of weight on a standard size pool table.
How thick should slate be on a pool table?
The modern slate thickness for most 7–8′ American pool tables is 3/4″ and one solid piece. One-inch slate in three sections is common in older 8′ tables. The Billiard Congress of America requires professional size 9′ tables to have 1″ slate or thicker with at least a 3/4″ wooden backing frame.
How can you tell if a pool table is 3 slate?
Look underneath your table in the area where you were pointing. If you see a gap or a seam, then it is a 3-piece slate pool table. If your pool table doesn’t have obvious gaps or seams in the indicated area, it’s likely to be a 1-piece-slate pool table.
What size is the slate on a pool table?
¾” slate is good and 1” slate is the best. Sometimes you’ll find lower quality tables that only use ½” slate. Thicker slate has fewer deficiencies and is usually permanently framed with wood to provide additional support when installed on top of the pool table cabinet.
How much room does a pool table need?
At the minimum, there should be 5 feet of clear space around the table. This space is enough for comfortably placing and stroking the cue. Therefore, the ideal space for your pool table should be at least 10 feet added on top of the table’s dimensions.
Can you slide a pool table on carpet?
Carpet is stretched during installation to remove wrinkles and bumps. There is no way to stretch the carpet under a sitting pool table. Instead, your installers will lift the table one end at a time and roll the carpet beneath it. They will then stretch the carpet in all four directions away from your table.
Is it worth moving a pool table?
While it may be tempting to rally up some friends and attempt to move the table yourselves, we strongly encourage you to hire a professional pool table moving company with experienced movers to do the job. Otherwise, it can cause serious injury and damage to both you and your pool table.
How do you move a pool table across the country?
Choose the Right Method for Moving a Pool Table to Another House. If you are transporting your item from one room to another, you can do it by using four dollies. Lift each end of the item one by one, placing the dollies under the leg, but make sure to brace the dollies to prevent the bulky item from rolling.
