Table of Contents
How do you mount a VR sensor on a vive?
Installing the base stations Mount the base stations diagonally at opposite corners of your space. Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on.
Where should I place my HTC Vive sensor?
The ideal sensor placement for HTC Vive is in two corners of your play area, angled downwards toward the middle. Mounting plates for your wall are provided, but if you’re unwilling to drill holes or would like your system somewhat portable, support rods combined with a moveable tripod ball head clamps work well.
How do you install a Vive wall mount?
Mark where you want to install each of the mounts on your wall, and then screw the mounts in. When mounting on concrete or drywall, first drill ¼ inch holes and insert anchors before screwing mounts in. Rotate the base station to screw it onto the threaded ball joint.
Where do you mount a base station?
Installing Base Station 1.0 Mount the base stations diagonally at opposite corners of your space. Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on.
Do you need sensors for HTC Vive?
The HTC Vive kit comes with two base stations, sensors that map where the headset and controllers are at any one time. They are essential to the experience and need to have a clear line of sight to the entire play area. The other base station would be more of a problem as we don’t have two tripods laying around.
How far apart can Vive sensors be?
In the ideal setup, Base Stations should be above head height (at least 6.5 feet / 2 meters), angled down by 30-45 degrees, positioned no more than 16 feet / 5 meters apart, and place opposite one another in separate corners of the play area.
How do you set up a VR room?
To create a VR spectator area, you need to create some kind of a safe physical barrier between your play area and your spectator area. If you have a large horizontal room. Take a couch and move it to the far end of the room, face it toward the wall and then put a monitor or TV on the wall.
Do Vive base stations come with mounts?
For best results, install SteamVR Base Station 2.0 using a mounting kit, which is provided as an in-box item in VIVE Pro full kit.
How do Vive base stations connect to PC?
Using a micro-USB cable, connect the base stations to one of your computer’s USB ports one at time. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Once the base station is detected by the SteamVR app, the firmware update will start automatically.
Do you need base stations for HTC Vive?
Unfortunately, there are no “out-of-box” cases in which a Vive or Vive Pro HMD could be used without base stations.
How do the Vive base stations work?
A base station is HTC Vive’s communication beacon. Base Stations power the presence and immersion of room-scale virtual reality by helping the Vive headset and controllers track their exact locations. According to XinReality, “Base Stations perform this function by constantly flooding the room with a non-visible light.
How many base stations does vive have?
According to the official support page for HTC Vive, you can set up to four base stations on a single room sized at around 10 m x 10 m (32 ft 10 in x 32 ft 10 in).
DO base stations need to see each other?
The Base Stations should be oriented with a slight downward tilt so they can simultaneously see the floor across the play area but stay in view of each other. This is crucial for consistent full range tracking with minimal loss of signal.
How do you mount a Vive lighthouse?
Mount the base stations diagonally and above head height, ideally more than 2 m (6 ft 6 in). Secure the base stations in a location where they can’t be easily jostled or moved. Each base station has a 120-degree field of view, so it’s ideal to adjust its angle between 30 and 45 degrees to fully cover your play area.
Can Command Strips hold base stations?
Command strips (large ones) are rated to hold over 2kg, and I currently use them for a lot of heavy art work in my flat, and even hanging nanoleaf light panels. However, these base stations have a motor in, so I’m unsure if it’d be stable enough!Nov 28, 2019.
What is a valve index base station?
To track your movements in virtual reality, the Valve Index headset utilizes SteamVR Base Stations 2.0 or compatible Lighthouse 2.0 tracking stations that come with HTC Vive Pro. Although for seating and standing-only VR experiences one base station can be enough, two stations are recommended for optimal tracking.
How many sensors does the HTC Vive need?
Impeccably designed for VR versatility. Six camera sensors and the latest software optimisations enhance inside-out tracking accuracy.
Can you use Rift sensors with Vive?
It works with the Oculus Rift via Steam’s SteamVR system which is integrated with Vive’s System. You will still need the Oculus Sensors for the Rift and the Oculus Touch controllers, but the Vive trackers will need the Vive Lighthouse Base Stations to track their positions.
Is HTC Vive discontinued?
The Vive Cosmos, touted as the consumer replacement for the now discontinued original Vive, was launched in early 2020. For the Cosmos, HTC ditched the Valve-developed base stations in favour of inside-out tracking similar to their Vive Focus and that employed by Windows Mixed Reality devices.
