Table of Contents
What should I hang my dart board on?
Best Place to Hang a Dart Board The area should be at least 5 feet wide and 11 feet long. Darts can bounce over 8 feet from the bull’s eye so make sure that you make the proper accommodations. To protect you wall, you can hang your dartboard on a piece of plywood that covers the surrounding wall.
How high should a dart board be mounted?
Dart Board Measurements: Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
How do you hang a dartboard on a plasterboard wall?
To hang a dartboard on drywall, it’s best to mount the board to a wall stud.Hanging on Drywall: The Basics Locate a stud in the selected play area, using a stud finder. Measure the wall along the stud 68 inches up from the floor. Use a pencil to mark positions for the pilot holes through the holes in the bracket.
What is the distance from dartboard to throw line?
Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.
How do you hang a dartboard in a cabinet?
Position the dartboard into the cabinet and slip the head of the center screw into the mounting bracket. If the board is too loose, remove it, tighten the screw slightly and then remount the dartboard. Position the dartboard with the 20 position pointing straight up.
How far is dartboard from throwing?
Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice. Major tournaments, however, use a “hockey” which is a thin raised strip of wood approximately 1 1/2 inches high (see image diagram below).
Can you put a dartboard on plasterboard?
Just a dartboard is no problem at all. I mounted my board using 2 drywall anchors as well. The large ones I used were definitely overkill as each can support 40 lbs, but I already had a bunch lying around.
How do you hang a dartboard outside?
If you have a barn or shed, or some other structure or outbuilding, this could be the perfect place to mount your board outside. You simply mount the dartboard to the wall at the correct height and you’re good to go. You can use a dartboard backing or cabinet for this if you’re worried about damaging the siding.
Do you need a drill to mount a dartboard?
Most dartboard cabinets come with all of the hardware you will need to mount it. Use a cordless drill to secure the cabinet using the provided screws. Use a #8 screw if your cabinet doesn’t have screws with it. A #8 screw, also known as a 5⁄32 inch (4.0 mm), is a standard screw for installation projects.
How far away is the Oche from the dart board?
The throwing distance in the game of darts is regulated at 7′ 9.25” | 2.37 m from the oche to the front face of the dartboard. Dartboards must be hung on the wall with the center of the bullseye at 5’8” | 1.73 m from the floor—a height established based on the eye-level of a six foot man.
Why is 26 in darts called breakfast?
When a dart player is aiming at 20 and slops a 5 and a 1 for 26 points: “bed and breakfast”. : Bed And Breakfast or Half-a-Crown or Murphy: A British term for the score of 26 in an 01 game, from hitting a 20 and one each of the adjacent numbers, 1 and 5. So called because breakfast used to cost 26 pence.
How do you protect a wall from a dart board?
To protect your walls from darts, you should cover the wall with a dart board cabinet or surround. Cabinets are great because they offer protection for your wall as well as your dart board, and provide extra storage space when not playing. There are many options to suit your style and budget.
What dart boards do professionals use?
What dart board do professionals use? Professional dart players almost exclusively use bristle dart boards such as the Barrington Collection Bristle Dart Board or the Winmau Blade 5. These meet tournament regulations, allowing them to practice in the right conditions.
How do you hold a dart?
Hold the dart with your index finger and thumb and use your middle finger to support the dart. This is a stable and balanced grip for a great throw. Keep your balanced posture to throw darts straight at the target.
Can you lean over the line in darts?
A player may lean their upper part of the body over the throw line and throw a dart or darts as long as their toe doesn’t cross the front edge of the throw line. A player may not lunge or cross the front edge of the throw line while throwing a dart.
How do you hang a heavy Cabinetboard?
The dartboard can be mounted inside a cabinet or directly to a wall. Screw to a wall stud or use anchors. The center of the bullseye should be 68 inches (173 cm) above the floor. Note that wall thicknesses will vary.
What’s the diameter of a dartboard?
The standard dimensions of the dart board are as follows: Double and treble ring inside measurement: 8mm. Bull inside diameter: 12.7mm. Outer bull inside diameter: 31.8mm.
Can your elbow cross the line in darts?
You can lean over the throw line (otherwise known as the oche) in darts just as long as your feet do not go over the line. Whether there is any benefit to leaning over the line will depend on how it affects your balance as you need a stable stance for an accurate throw.
Why is it called an Oche?
WHERE DOES THE WORD OCHE ORIGINATE? ‘Oche’ as a word meaning the throwing line that a dart player stands behind to throw his or her darts is comparatively recent, being introduced by the British Darts Organisation in the mid-1970s. The actual word is believed to be derived from Old Flemish meaning a ‘notch’ or ‘nick’.
