Table of Contents
How do you hang a heavy mantle?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How is mantle attached to wall?
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
How do you hang a heavy mantle on drywall?
For stone or brick walls, insert the lag bolts’ sleeves into the pilot holes, then drive the lag bolts into the sleeves with a lag screwdriver. For drywall, use a hammer to tap a wall anchor into each pilot hole not entering a wall stud. Drive 2-inch screws through each pilot hole to hold the mantel in place.
How heavy can a mantle be?
The maximum weight for all 60INCH MANTELS is 150 lbs. The maximum load for all 72 inch mantels is 180 lbs.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How do you install a floating mantle?
Here’s how to install a floating mantel!How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you install a floating mantel bracket?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. Drill Mantel Holes. Mark on the rear of the mantel where the lag bolts will hit. install the mantle.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How far above the mantle should a TV be mounted?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
How deep should a fireplace be?
The standard size of a fireplace is anywhere from 2 – 3 feet wide, 24 – 29 inches high, and always about 16 inches deep. Of course, the opening could vary depending on your style and design ideas, as well as where you are locating the fireplace.
Should mantel be wider than TV?
For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace. Having more space beyond the TV edges can sometimes make the TV look too small for the wall it is on.
How far should a mantel extend from the fireplace?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
How high should fireplace be off floor?
Raising these fireplace 6 to 12 inches off the floor is perfectly acceptable. In bedrooms, we suggest that you raise them even higher, so that the flames are visible from the bed. This might mean that the fireplace is 24 to 36 inches off the floor.
How high should a mantel be above the fireplace?
As a general rule, a mantel is placed about 12 inches above the fireplace opening. Add an inch to the distance for every inch that the mantel protrudes. So, a mantel 6 inches deep would be attached 18 inches above the firebox opening.
How do you fill a gap between a wall and a fireplace?
You can fix gaps between brick fireplaces and sheetrock. Measure the size of the gap between the drywall and the brick. Use 1/4-round trim molding that’s wide enough to cover the space of the gap. Place a tube of acrylic caulk into a caulking gun. Replace the caulk in the caulk gun with a tube of construction adhesive.
How is a mantle attached to a brick fireplace?
The mantel is lifted into its wall position by aligning the holes to the support rods. The mantel is pushed back into the rods and against the bricks. Secure attachment of a mantel to a brick fireplace is realized by tapping it in with a hammer and a scrap wood spacer.
What is behind the wall above my fireplace?
If you live in a newer home the walls above the fireplace are likely to be drywall over standard wood studs or furring strips. Studs are usually made of 2×4’s while furring strips are only an inch wide. You can install any TV mount as you normally would on any wall.