Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How are fireplace mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
How do you support a heavy fireplace mantel?
The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How thick are mantels?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How do you mount a heavy mantle?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
How much overhang should a fireplace mantel have?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that. Do not guess when sizing the mantel to a room, or the mantel could wind up being too long or too short.
How far above a fireplace should a mantle be?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
How far should a fireplace mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How do you hang a floating mantel on a fireplace?
Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support. Caulk the seam and allow time to dry before using.
How do you drywall over a brick fireplace?
When attaching plasterboard to a brick fireplace wall, you have two options: use construction adhesive to glue the drywall directly to the brick, known as the direct bond method, or mount the drywall with screws. Both methods require you to cover the joints with tape and compound.
Can you put a TV on a mantel?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
Can you set TV on mantle?
Ideally, televisions should be set at the eye level of seated viewers, but unless you have a very low mantel, this placement probably won’t be possible above a fireplace. Sit in your favorite chair and stare at the template for a while; if you experience neck strain, consider placing the TV somewhere else.
Can you change fireplace mantel?
While mantels come in a variety of styles, most modern mantels are not a single, solid piece of wood. You can replace a fireplace mantel with one that suits your home’s decor in a couple of hours with some basic hand tools.
Should I drill into brick or mortar?
We recommend drilling into the mortar instead of the brick for a few reasons. Drilling directly into brick is more difficult than drilling into mortar and runs the risk of damaging the brick. It is also easier to repair mortar if you drill into the wrong location or decide to remove your decorative item.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
How do you remove a floating mantel from a brick fireplace?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
