Table of Contents
To add bodies together: Click Combine. (Features toolbar) or Insert > Features > Combine. In the PropertyManager, under Operation Type, select Add. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. Click Show Preview to preview the feature. Click .
How do I merge surfaces in SolidWorks assembly?
In the PropertyManager, under Selections: Select faces and surfaces for Surfaces and Faces to Knit . Select Try to form solid to create a solid model from enclosed surfaces. Select Merge entities to merge faces with the same underlying geometry.
Where is the combine feature in SolidWorks 2020?
In the Combine PropertyManager, you specify which bodies in a multibody part to add, subtract, or overlap. (Features toolbar) or Insert > Features > Combine . You can only combine bodies contained within one multibody part file.
How do you combine assemblies on shape?
How it works Tap the Versions and history icon to open the panel: Tap the information icon next to the Source workspace and tap Merge:.
How do you merge weldments in Solidworks?
You cannot combine two separate parts. However, you can create a multibody part by using Insert Part to place one part into the other part file. Then you can use Combine on the multibody part. It is strongly recommended that you do not use the Combine feature to combine weldment bodies.
How do you merge two surfaces in Solidworks?
Simply hold down Ctrl and select the two entities you wish to mate. The supported mate types are all standard mates (Concentric, Coincident, Equal, etc), as well as some advanced mates (Profile Center, Symmetric and Width) and some mechanical mates (Cam and Slot).
What is merge result in Solidworks?
The Merge results option of the Base Flange/Tab command lets you merge bodies with coplanar faces.
How do you make a group on shape?
Create the parts you wish to group (in a Part Studio). Insert those parts into an Assembly. Arrange the parts in the desired relationship to each other. Select Group in the toolbar, and then select the parts to group; click .
What is a part studio Onshape?
An Onshape Part Studio is a container used to create and edit parts, surfaces, and sketches. The Part Studio lives in a tab within a document and generally consists of the Feature toolbar, the Feature list, and the graphics area containing the model.
How do you merge a tangent face in Solidworks?
Select Merge tangent faces to cause the corresponding surfaces in the resulting loft to be tangent if the corresponding lofting segments are tangent. Faces that can be represented as a plane, cylinder, or cone are maintained. Other adjacent faces are merged, and the sections are approximated.
How do you explode an assembly in Solidworks?
Creating Exploded Views (Assemblies) Do one of the following options: Click Exploded View . Select one or more components to include in the first explode step. Drag a translation or rotation handle to move selected components. Modify explode options: Click Done. Create more explode steps as required, and click .
How do you Unfix a part in Solidworks?
To fix or float an assembly component: Right-click the component in the graphics area or the component’s name in the FeatureManager design tree. Select Fix or Float. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.
How do I use assembly in Solidworks?
Creating an Assembly from a Part Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.
How do you offset extrudes?
To offset it, select the option for a second direction. Make sure it is pointing in the same direction as the first, and set the depth to what you would like the offset to be. Now, the boss needs a hole added for the bolt. The hole will start at the sketch, but will be a specific offset from the bottom.
What is extruded boss in SolidWorks?
The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.
How do you add parts to part studio Onshape?
Insert Parts and Assemblies Click the Insert parts and assemblies tool . Select Current document to insert from this document or Other documents to find another document from which to select. Once a document is selected, select Part Studios or Assemblies to filter further.
How do you make Onshape moving parts?
Transform Click . Select a part (and its Mate connector or axis, if desired) to move. Select the method of moving the part (transform type): Translate by line – Move the part along a selected line: such as a part edge. Click .
How do you connect faces in Solidworks?
Use the Select Connected Faces pop-up toolbar to help select connected faces in models. To use Select Connected Faces: Right-click a face and choose Select Connected Faces. A pop-up toolbar appears to help you select faces to move.
How do you use the knit surface in Solidworks?
To knit surfaces: Click Knit Surface on the Surfaces toolbar, or click Insert > Surface > Knit. Create adjacent, non-intersecting surfaces. In the PropertyManager, under Selections: Select Gap Control to view edge pairs that might introduce gap problems, and to view or edit the knitting tolerance or gap range. Click OK .
How do I edit a explode in SolidWorks?
To edit an explode step: To open the Explode PropertyManager: Right-click Exploded View and click Edit Feature. Reposition the components: To move a component along its axis, drag the handle . Update the options in the PropertyManager: Select components to add to the step. Click Undo to undo changes. Click Done.
How do you explode lines in SolidWorks?
To insert an explode line sketch: Click Explode Line Sketch (Assembly toolbar) or Insert > Explode Line Sketch. The Explode Sketch toolbar appears. Add explode lines by using: Route Line (Explode Sketch toolbar) Close the sketch. The sketch 3DExplode appears in the ConfigurationManager under Exploded View .
Why is part fixed in Solidworks assembly?
It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.
What does F mean in Solidworks assembly?
(f) Fixed. (?) Not solved. The absence of a prefix indicates that the component’s position is fully defined.
