Table of Contents
What are standard size mini blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
How do I know what size blinds I need?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Do you measure windows from the inside or outside?
Run a tape measure from the outside of the frame to the inside and take the measurement from edge to edge of the window frame. Do this in several locations around the window frame and rely on the smallest measurement once again as your final dimension.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How do you measure a window for blinds?
Measure from top (where you want the rail to be) to bottom (where you want the bottom of your blind to finish). We recommend to start your measurement at least 15cm above the recess and finish at least 15cm below the window sill to prevent light bleed. Measure 3 equal points across the window and note the longest size.
What are standard window sizes?
Widths can be 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, and 8 feet. Standard heights can range from 2 feet tall to 8 feet tall, with additional heights of 18, 52, 54, and 62 inches. Rough openings are in whole numbers, while 1/2 inch is taken from each rough opening size to get the actual window size.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
How much space needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How do you know what size blind slats to buy?
When picking a slat size for your blinds, you want to match the proportions of your window. Pick smaller slats for medium or small windows such a ½ to 1” wide slats. It is important that the blinds not overwhelm the space. Larger slats like 2 or 2 1/2” slats are better for larger windows.
How far should Window blinds be from window?
As a general rule: 2″ horizontal blinds such as faux wood blinds and wood blinds need at least 1.5″ inches and 3″ for a flush mount. Honeycomb Shades for instance require less space needing just under 1″ depth and 2″ for a flush mount blind.
Does window size include frame?
Just remember that vinyl or aluminum window measurements include the entire unit — glass, frame and sash — while wood window sizes go by the measure of the glass.
What is the length and width of a window?
When recording measurements, follow the format “width by length.” For example, a window that is 63 inches wide and 27 inches long is recorded as “63 x 27.” A window that is 37 inches wide and 55 inches long is recorded as “37 x 55.” Measure windows width from left edge to the right edge.
What is the standard rough opening for a window?
Recommended rough opening is between 3/4″ (19mm) – 1″ (25mm) larger than the window width and height. Ensure that the rough opening is plumb, level and square, and the walls in the opening are not twisted. a) 1 1/2″ (38 mm) solid blocking is required at the sill and sides of the opening.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
Does Home Depot custom cut mini blinds to size?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
