Table of Contents
How do you know what size window shade to buy?
Measure the height of your window opening in three places: left, center, and right. Use the smallest measurement if you’re measuring for sheer shades, vertical blinds, solar shades, or roller shades. For all other blinds and shades, use the longest measurement. Order at the exact opening size with no deductions.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How long should window shades be?
You’re not measuring the width of the window itself necessary. You’re measuring the window you would like the blinds to cover. If you wish to maximize privacy and light control, plan the set of blinds to extend as much as three inches beyond both sides of the window.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do you measure for blinds?
How Do You Measure your Blinds? Measure your window opening width at the top, middle, and bottom. Also measure the height at the left, right, and center. Write the narrowest width and tallest height down, rounded to the nearest 1/8 inch. Write down your measurements as width X height.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
Can you use blinds that are too long?
It’s simpler than it looks to shorten blinds. Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
Is it okay for blinds to be too long?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
Can a Roman shade be too long?
Approaching the problem of roman shades that are too long is not difficult. If you have roman shades that you love but they don’t fit the length of your window, you can easily make an adjustment and provide some cost effective budget decorating.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
How far should blinds stick out?
A typical 2 inch window blind needs a minimum of an inch and a half but at least 3 inches for a flush mount. A flush mount blind is on that is completely recessed in the window frame and nothing is protruding out of the window frame.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
Is there an app to measure windows?
Windowmaker Measure 4+ Windowmaker Measure facilitates the recording of measurements for window and door openings. Please write to measure@windowmaker.com. For each ‘hole in the wall’, the app allows the user to record a photo with dimensions, notes and even voice annotations.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
What is Zebra blinds?
Zebra Shades are a very modern alternative to a horizontal blind. Zebra Shades are Roller shades that allow you to transition between sheer and privacy. The blinds can be adjusted so that the 3″ zebra stripes line up-offering privacy, light control, and insulation.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
