Table of Contents
Measure the actual mower deck size using a tape measurer and extend the tape from the widest point on one side of the deck to the opposite side of the deck. The average riding lawn mower, also referred to as a garden tractor, is between 48 inches and 63 inches wide with the discharge chute in the upright position.
How do you measure the size of a lawn mower?
LENGTH: Length is measured diagonally from one tip of the blade to the opposite tip of the blade. It is important to measure the length correctly. Measuring from end to end will result in the wrong blade length. All length measurements must be made diagonally.
How do you measure a riding lawn mower?
Make sure you get the right tractor for your lawn size. 1/2 – 1 acre — For a lawn this size, you’ll want a riding lawn mower with a cutting width of up to 42″ and at least a 14 HP engine. 1 – 2 acres — For yards in this size range, a riding lawn mower with a 42″ or 46″ deck and an engine in the 14 – 16 HP is necessary.
How do you measure for a riding lawn mower cover?
How to Measure a Riding Mower Deck Run the measuring tape over the top of the mower deck, from right to left or left to right, as close to the middle as possible. Secure the end of the measuring tape on the other end of the mower deck and note the size.
Are lawn mower decks universal?
So, are lawn mower decks interchangeable? Lawnmower decks are largely interchangeable. Engines will swap without issue. However, blades and drive systems may differ.
How do I know what size lawn mower blade I need?
Measuring a Lawn Mower Blade Length should be measured from cutting tip to cutting tip, diagonally across the blade. Type of Center Hold: Circle, 5 / 6 / 7 point star, hourglass or “Double D” Center diameter should be measured directly across the center hole. Diameter of outer holes.
How do I know what mower blade I need?
The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.
How wide is a typical riding lawn mower?
Riding lawn mowers fitted with a rear engine can measure 30-inches wide, while commercial zero-turn mowers, with or without a steering wheel can have a width of over 80-inches, and are equipped with one of many different types of transmissions including hydrostatic transmissions, and heavy-duty transmissions.
Does a 1/2 acre need a riding mower?
For lawns over 1/2 acre, we recommend upgrading to a riding mower. If cutting time is important and you have a lot to cut, you need a fast riding mower with a 40-60 inch+ cutting deck.
What is the widest riding lawn mower?
104 Inch Width Of Cut Makes Big Jobs Easy. Hustler’s Super 104™ can easily handle acres of work. Offering a 104″ width of cut, zero-turn precision and up to an impressive 11 mph speed, this machine is in a class by itself.
How are John Deere mower decks measured?
Lie down on the ground next to the elevated mower, and pass the tape measure beneath the blades, hooking it on the opposite side of the deck. Note the distance on the tape measure. This is your deck size.
What is the deck on a riding lawn mower?
A lawn mower deck is the part of a lawn mower that protects the user as well as the engine of the mower from the blades and the debris shot off from the blades.
Where is the model number on a John Deere mower deck?
Model & Serial Number Location The model serial number of a John Deere lawn mower is printed on an identification tag located on the left side of the deck (standing behind the mower). The serial number (PIN) is 13 or 17 digits long.
Is a deeper mower deck better?
“With the deepest deck and highest lift blade, the mower should do a tremendous job vacuuming and bagging,” Tegtmeier noted. Pena added that deeper decks create a tighter vacuum, the airflow trapping grass underneath the deck and standing it up so blades can clip grass neatly and evenly.
What does the inches mean on a lawn mower?
The smaller your yard, the smaller the mower deck can be – the actual width the mower will cut in a single pass. A 20-inch walk-behind mower may be perfect for a small yard, but you will probably want a 21-22 inch mower for a larger yard to cut down on mowing time.
Are riding mower decks interchangeable?
Are mower decks interchangeable? – Quora. Quite a lot of mowers are built the same way, by the same company, but sold with different brand names on them, and in this case, if it’s the same basic MODEL of mower, you can usually interchange the decks, no problem or only very minor problems.
What size blades go on a 52 inch deck?
Enhance your purchase 2 Blades Required for 36″ & 3 Blades Required for 52″ Cut.
What size blades do I need for a 42 inch deck?
2 blades are required for a 42″ cut deck. This blade replaces Poulan/Craftsman 134149 and 532134149; Husqvarna 532 13 41-49. Blade measures 21″ long by 2-1/4″ wide with a 5 point star center hole.
What size blades go on a 42 inch deck?
AYP Blade fits 42″ Cut Decks. AYP Blade fits 42″ Cut Decks, needs two blades. Size: Length: 21″, Center Hole: 5/8″Star, Width-thickness: 225-149. Replaces # 127843, 138498, 131323, 138791 & 532127843. {Blades are sold individually} If you purchase 8 of these blades you get FREE SHIPPING.
