Table of Contents
How to Measure for Granite Countertops Measure the length and width of the entire surface you want to be covered with granite in inches using your measuring tape. Multiply the length by the width. Divide the total area in inches by 144 to get the area in square feet. Measure for the backsplash.
How do I calculate how much granite I need?
Multiply the height of the backsplash by the length of the countertop. The resulting number is the area of your backsplash. Add the area of your countertop to the area of your backsplash. The resulting number is the total amount of granite you need expressed in square inches.
How do you measure a countertop?
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
How many square feet of countertops are in an average kitchen?
The average measurement for a kitchen countertop is 30 square feet. However, the variation between kitchen designs is vast. There are kitchens with much smaller or significantly larger countertop measurements. The right size for your kitchen will depend on the floorplan and counterspace you want in your kitchen design.
How many sq ft are in a slab of granite?
In terms of surface area, a typical slab of granite will be 45 square feet, although this is likely to end up being slightly less due to the re-shaping of the stone.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
What are standard countertop dimensions?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
How do you figure square footage for granite countertops?
How to Measure for Granite Countertops Measure the length and width of the entire surface you want to be covered with granite in inches using your measuring tape. Multiply the length by the width. Divide the total area in inches by 144 to get the area in square feet. Measure for the backsplash.
How much does granite cost?
Granite countertops will cost you around $40 to $60 per square foot, with the total price for installation and materials coming in between $2,000 to $4,500. Comparatively, marble costs around $75 to $250 per square foot, with the average cost around $75.
How do I estimate the cost of countertops?
Here is the average estimate cost per square foot for kitchen countertops based on the material.Kitchen Countertops Cost Per Square Foot. Material Cost Concrete $65 – $135 per square foot Granite $70 – $175 per square foot Engineered Quartz $80 – $140 per square foot Marble $110 – $250 per square foot.
How big is a sheet of granite?
Typical Dimensions Granite slabs are typically between 9 and 10 feet long and between 5 and 6 feet wide, although the exact dimensions of individual slabs vary.
Can you put hot pans on granite?
Homeowners don’t need to worry about damaging their countertops with everyday use because granite is quite heat resistant. Placing a hot pan on a well-maintained granite slab will not cause it to crack or weaken. Just remember that repeatedly placing a very hot pan on the same spot may cause granite to discolor.
What is the normal thickness of granite countertops?
The industry standards typically hover around 1 and 1/4 inch (or 3 centimeters) for granite and marble kitchen island countertops and 3/4 inch (or 2 centimeters) for bathroom granite and marble vanity tops.
Is a 10 inch island overhang enough?
The overhang of a kitchen island or purpose built bar is the amount of countertop that extends beyond the body of the actual bar. A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated.
Is 12 inch overhang on island enough?
According to Atlantic Shopping, if you want to be able to eat at your kitchen island, you’ll need at least 12 inches of overhang to make adequate knee space. It’s also important to remember than an overhang of over 12 inches requires support to make it sturdy enough to lean on and eat off of.
How far can a granite countertop overhang without support?
The length of granite overhang available without support depends on a few factors: Granite thickness – granite tops with a thickness of 3 cm can have an 8-10 inch overhang without additional supports. If your granite top has a 2 cm thickness, we recommend attaching a support system should the overhang exceed 6 inches.
What is standard kitchen countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
How much space should be between countertop and upper cabinets?
The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.
