Table of Contents
How do I know what size my garage door springs are?
Basically, you run a tape measure along the length of a spring, and take down the number of inches. Therefore, if your tape measure indicates that a torsion spring is 36 inches from one end to the other, that’s a 36-inch — or three foot — torsion spring.
Does garage door spring length matter?
Springs That Are Too Small Can Make the Opener Less Effective. If the spring for the door is small, it can make the door too heavy. When someone tries to raise the door, it will fall back down instead of continuing to lift. A user unaware of the garage door issue could get hurt by the door falling shut.
What is the color code on garage door springs?
Garage Door Extension Spring DASMA Color Code Chart Color Pounds Kilograms Brown 60/160/260 xxx Orange 70/170/270 30/75/120 Gold 80/180/280 35/80/125 Light Blue 90/190/290 40/85/130.
Are there different size springs for garage doors?
Generally, most residential garage doors are either seven or eight feet tall. Seven-foot doors usually use a 25-inch spring, and eight-foot doors use a 27-inch spring. However, because precision is important, we’ll show you how to measure it by hand.
How do you measure a spring?
How to Measure a Compression Spring Measure the spring wire diameter, preferably to 3 decimal places for accuracy using calipers. Measure the outside diameter of the coils. Measure the length in its free condition (uncompressed). Count the number of coils. Note the winding direction of the coils.
How do I know if my garage door springs need to be adjusted?
More Noise Than Usual. A balanced garage door should be relatively quiet when traveling up or down the door tracks. If your garage door is making excessive creaking, grinding, or squeaking noises when opening or closing, your springs may be strained and most likely need to be replaced.
Can I put bigger springs on my garage door?
If your garage door springs have lasted less than five years, or if you plan to live where you are for many years, you may want to try the extra long life torsion springs. By using larger springs, you can, in most cases, quadruple your spring life while only doubling the cost of the springs.
What happens if garage door spring is too strong?
Strong Springs If your springs are too strong, and if you wind the springs the correct number of turns or adjust the cables and S-hooks correctly, the door will not stay on the floor when closed. It will usually not stay in the middle when opened halfway. However, it will stay up when opened fully.
Can I replace garage door spring myself?
So faced with a broken garage door spring, the question is, can you fix it yourself? You absolutely can replace a garage door spring, but the type of springs you have may influence your decision. If you’re uncomfortable with any part of the process, simply leave the job to a garage door professional.
Should garage door springs match?
Garage door springs must properly match the door’s weight. Choosing springs that can support the weight will provide you with a properly balanced door.
How many springs should a garage door have?
As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.
Should you replace both garage door springs at the same time?
When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.
How do you calculate coil springs?
To calculate the amount of spring rate you will need on order to meet your working loads, simply divide the load you will be applying on your spring by the distance you expect your spring to travel or compress under that load.
How much is a spring for a garage door?
Replacing garage door springs costs $150 to $350 on average. The springs alone typically run $30 to $75 each but you may find them as low as $15 a piece and up to $100 each. Commercial grade springs can run $300 or more.
Can I open garage door with broken spring?
As professionals in the industry, we advise you do not attempt to open your garage door if the spring is broken. Extension springs on either side of the door, along the rails, help counterbalance the weight of the door as it is raised or lowered. Torsion springs across the top of the door help do the heavy lifting.
How long does it take to replace garage door springs?
Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.
