Table of Contents
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How are premade blinds measured?
1) Measure the width inside the window opening at the top, and round down to the nearest 1/8″ measurement. 2) Measure the height inside the window opening from the top of the window opening to the window sill. If your window does not have a sill, measure to the point you would like the blind to reach.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
How wide should my blinds be?
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do you know what size blind slats to buy?
When picking a slat size for your blinds, you want to match the proportions of your window. Pick smaller slats for medium or small windows such a ½ to 1” wide slats. It is important that the blinds not overwhelm the space. Larger slats like 2 or 2 1/2” slats are better for larger windows.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Can blinds be wider than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
How wide can horizontal blinds be?
The width of these blinds can be anywhere between 70” and 96”. It is sufficient for most windows. however, if you have windows that are larger then it is recommended to install a set of 2 or 3 blinds per headrail for better coverage and fit.
How do you measure a window inside?
From inside the home, hold a tape measure in the top right corner where the horizontal and vertical window trim meet. Extend the tape measure diagonally to the lower left corner where the trim meets and record the measurement. Now make a measurement from the upper left corner to the lower right corner.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
What is Zebra blinds?
Zebra Shades are a very modern alternative to a horizontal blind. Zebra Shades are Roller shades that allow you to transition between sheer and privacy. The blinds can be adjusted so that the 3″ zebra stripes line up-offering privacy, light control, and insulation.
What’s the difference between wooden and Venetian blinds?
Wooden blinds are often referred to as Venetian blinds which also have horizontal slats, one above another. Venetian blinds are basic slatted blinds made of metal, plastic or wooden slats.
