Table of Contents
Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.
How do you measure for a toilet seat replacement?
How do I know the size of my toilet?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Do all toilet seats fit the same?
Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
How do you tell if my toilet is elongated or round?
Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).
Can I put an elongated toilet seat on a round toilet?
An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.
How do you measure a B&Q toilet seat?
Measure from your toilet seat fixing point to the lip and then the width to find the dimensions needed for your new toilet seat.
Are all toilet bases the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
What is the difference between a 10-inch and 12-inch rough in toilet?
Considerations. When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
What are common toilet seat sizes?
Round toilet seats are the standard for most bathrooms. These come in a variety of sizes and dimensions (13-15 inches wide, 16 to 18 inches long) and shapes (round or oval).
What size are toilet seat bolts?
The bolts have a 7/16-inch diameter that fits most standard toilet seats.
How do I stop my toilet seat from sliding sideways?
Related Articles Lower the seat and locate the two screw covers at the back of the seat. Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. Remove the nut and bolt and take the seat off the bowl. Insert the screw back in the holes.
Does toilet seat have to match toilet?
As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.
Are 1 piece toilets better?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
What toilet uses the least amount of water?
7 Best Water Conserving Toilets – Reviews KOHLER K-3988-0 Wellworth Toilet. Swiss Madison Well Made Forever St. American Standard Option Dual Flush Elongated Toilet. WOODBRIDGE Dual Flush Toilet. KOHLER K-3817-96 Memoirs Stately Comfort Toilet. Nature’s Head Self Contained Composting Toilet. TOTO Drake Toilet.
Is my toilet too small for a bidet?
In most cases, you will need 3 inches or 7.6cm for a Round toilet and 2 inches or 5cm for an Elongated toilet for a Bidet Toilet Seat to fit. This area should be flat and not have any curvature or sloping up. Most two-piece toilets will have 3 to 4 inches or 7.6cm to 10cm.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
How do I measure for a replacement toilet UK?
For length, place one end of your tape measure between the fixing holes and stretch out to the very front end of your toilet. For width, measure across the pan at the widest point. For height, measure the distance between the fixing holes and the cistern or wall.
Are all toilet seats a standard size UK?
There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.
Is there a tool for tightening toilet seats?
From under the bowl, turn the toilet seat nuts clockwise until they are tight. A ratchet wrench with a deep socket is usually the easiest way to tighten these bolts, but an adjustable wrench can also be used.
