Table of Contents
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you calculate fabric for sheer curtains?
Multiply the finished width by the fullness factor and divide the result by the width of egular-width fabric. Multiply the result by the cut length and divide the result by 36 for the number of yards of fabric required.
How are sheer panels measured?
Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
How do you measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How do I calculate curtain material?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you choose curtain rod length?
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
How much wider Should a curtain rod be than the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How many curtain panels do I need calculator?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
Can you put 2 curtains on one rod?
In window treatment, layering refers to using more than two-panel pairs of curtains to dress your windows. To achieve this look, slide one panel of the main curtains onto the rod. Move it to the very end to create space for additional panels. After that, add one or two of the sheer panel on to the rod.
Should sheer curtains touch the floor?
Floor-length sheers should end one to two inches above the floor if they are hung beneath another curtain. However, sheers can go to greater lengths if they stand alone. For a soft and romantic look, add an additional three to four inches for “breaking” sheers, or 12 to 15 inches for sheers that puddle.
Can you double layer sheer curtains?
Tips to Choose the Right Curtain Layers Sheers and drapes: The most common and practical method for layering curtains. Use double brackets and double curtain rods to layer a sheer curtain under an opaque or blackout drape or curtain. This technique allows sunlight to shine through while still maintaining privacy.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
Are curtains measured per panel?
So for a 46 inch wide pole you will need a pair of curtains, with each panel measuring 46 inches wide. That way the two panels combined will be double the pole width to give you the required fullness. Track/Pole Width Recommended curtains width (each) 90″-132″ (220-335cm) 132 inches (335cm)*.
