Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
How do I know what size blinds I need?
Measure exact width where the blind is to be placed. Add at least 3 inches for overlap (1-1/2″ per side) for optimum light control and privacy. Measure exact height from the top of the proposed headrail location to the base of the sill. If there is no sill, measure to where the blind is to reach.
How do you measure blinds for replacement slats?
If you have an existing slat that you are looking to replace, then you can measure this. Remove the bottom weight and measure the total hem to hem drop of the fabric slat from the very top to the very bottom, ensure the fabric is flat with no folds or creases. This measurement is the drop size you will order.
How do you measure a roller blind for replacement?
Use a metal tape measure for accuracy. Measure the width at 3 different points as it may not be consistent along the entire recess. Measure at either end and in the middle, and use the smallest measurement as your width guide. For venetian, roman and roller blinds reduce the width by 1cm to allow for smooth extension.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
How wide should blind slats be?
Medium sized windows are the most common and generally default to the most common slat size, which is 2”. Most styles of window blinds are available in the 2” size to accommodate the majority of windows.
What width are vertical blind slats?
The most common slat sizes are 35 millimetres, 50 millimetres and 64 millimetres. However, some blinds feature larger slats — running to more than 127mm slat widths. Use a tape measure or consult your order history to find the width of your vertical blinds slats.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
What are standard blind sizes?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.
How do you measure roller blinds UK?
Here’s how to do it: Starting at the top, measure across the width of the window. Then measure across the middle and the bottom of the window, adding 120mm to each figure. Once you have your width, measure from the top of where your fitting will sit, to where you want it to drop.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
Are blinds length times width?
Decide if you want an inside mount or an outside mount before you begin the measuring process. If you aren’t sure, take measurements both ways and then choose blinds that appeal to you. Always put your width measurement first and height last (W x H).
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
How do you install blinds that are too narrow?
Here are some simple installation steps to follow: Position Headrail. Place blind centered in the window with the brackets and mark with a pencil on the top of the window sill on each side of the blinds headrail. Installing the mounting brackets. Install blinds. Install the valance.
How wide can horizontal blinds be?
These blinds can be anywhere from 70-96” in width, however for sizes larger than that you’ll have to go for 2 or 3 blinds on 1 headrail. They might be a replica of wooden window treatments but have entered the popular space because of the multitude of benefits they have on offer.
How wide can wooden blinds be?
Normally the maximum width of a wooden blind can be made to fit is around 242cm as any more and the weight of the blind will be too heavy to fully open or close the blind or actually fit safely to your window frame.
How wide can faux wood blinds be?
Faux wood blinds are a popular window treatment in the market known for their moisture-resistant and durable qualities. The width of these blinds can be anywhere between 70” and 96”. It is sufficient for most windows.
