Table of Contents
Lamp shades are sized by measuring cross the diameter at the bottom of the shade – so if the shade diameter measures 25cm across the bottom, then it is known as a 25cm shade.
How do I know what size lamp shade I need?
The shade should be twice as wide as the lamp base, and one third of the total height of the lamp. So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.
How do I measure for a replacement lamp shade?
Place a measuring tape across the top of the lamp shade, from edge to edge and as close to center as possible, to find the top diameter. Write down this measurement. If you have a square lamp shade, measure along its width from corner to corner to get the top measurement.
What are the 3 types of lampshades?
The three most common types of lampshade assemblies are: Spider, Uno and Clip-on (see diagram).
What are the different fittings for lamp shades?
There are three basic types of lamp shade fittings: spider fittings, uno fittings, and clip-on fittings: Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps.
How do you measure a lamp shade for a lamp?
Your shade should be about two-thirds the height of your lamp base (give or take an inch). Your shade should be about two-thirds the height of your lamp base (give or take an inch). Proportion is the key – too tall and the effect will be top heavy, but too short and your lamp will look out of balance.
Are lamp shades interchangeable?
Mixing and matching your lamp bases with different shades allows you to create a personalized design for your space. In most cases, the type of fitter is not interchangeable, so be sure to match the shade attachment to a compatible lamp base.
How do you measure for a lampshade Pooky?
Matching the shade size with the base size The height of the shade should be about three-quarters the height of the base. The width of the shade base should be roughly equal to the height of the lamp from base to fitting.
What is UNO lamp shade?
Uno lamp shades attach directly to the lamp socket. An uno lamp shade is a type of shade that fits onto a lamp socket with an uno fitter. The uno fitter has arms radiating outward attached to the inside edges of the shade that support a hollow round piece that slides over the socket.
What is the fitter size on a shade?
The fitter is the outer diameter of the lip which is inserted into the fixture’s shade holder. This will measure a little less than the fitter size so it can fit into the shade holder of the same measurement. The height of a glass shade is taken from the base of the fitter lip to the bottom of the shade.
What are upside down lamp shades called?
When it comes to floor lamps and overhead lighting, dome lampshades are the perfect choice thanks to their round bases, semi-circular shape, and downward lighting. They have a large opening on the bottom and top so they are truly ideal for general lighting especially in traditional to contemporary living rooms.
How do you know what size harp for a lamp?
To measure lamp harp sizes, take a measuring tape or a ruler. Then, note how many inches it runs from the topmost part of the harp to the socket cap. Generally, the height of the lampshade should not exceed the measurement of the harp plus ½ inch, and should not be smaller than the lamp harp’s height minus ½ inch.
Do all lampshades fit on all lamps?
Lampshades come in all shapes and sizes and can be paired with the right sized lamp base when fitted well. You must know how to measure one to make sure it fits your lamp well.
How do you measure a lamp harp?
The measurement for harps is from the “base” (that’s the bottom as shown in the photo) to the bottom part of the screw on top. If your lame already has the base attached, you can just use the top part of the harp.
What size should a bedside lamp be?
As a general rule, your bedside table should be one-third of the width of your mattress and, to fit with this scale, your lamp’s widest point should be one-third of the width of your bedside table.
How do you measure a lampshade UK?
How to Determine the Correct Lampshade Size Measure across the TOP of the lamp shade. Measure across the BOTTOM of the lamp shade. Measure along the SLANT (side) of the lamp shade.
How do you measure diameter?
Determine the diameter from the circumference by dividing the circumference by the value of pi, which is 3.141592. Pi is the ratio between the circumference and the diameter and when it is divided into the circumference the result is the diameter.
What are the two types of lamp shades?
Types of Lamp Shade Fitters Spider Fitter Shades. The spider lamp shade is the most common type of fitter for table and floor lamp shades. Clip-On Fitter Shades. As the name suggests, clip-on lamp shade fitters attach directly onto the light bulb with no additional hardware. Uno Fitter Shades.
Can you hang a lampshade upside down?
If the shade is upside down hanging from a light bulb which is also upside down it should be ok. These are made for candelabra bulbs. If you want to use a standard size bulb like is used in a lamp, it would be too big for the shade.
How do you mix and match a lamp?
Mixing and Matching Lighting Fixture Do’s: Tip 1: Layer Your Types of Light. 2: Create a Focal Point, then Don’t Distract from It. 3: Coordinate Across Rooms in an Open Floor Plan. 4: Mix Finishes, Tastefully. 1: Don’t Try to Do Too Many Things in One Room. 2: Don’t Be Afraid to Try Something New… 3: ….
How big should a ceiling lampshade be?
The height of the lampshade should be about three-quarters the height of the base. The diameter of the lampshade should be about the same as the height from the lamp base to the lamp fitting. The shade should be at least 1cm wider than the widest point of the base at both sides.
