Table of Contents
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
How do you measure the width of grommet curtains?
Related Articles Measure from the center of one grommet to the center of the next grommet. Hang the chosen curtain rod in place on the window wall. Determine the space you want the curtains to cover. Multiply the space available by 1.5 for a typical grommet curtain panel fullness.
How much wider should grommet curtains be than the window?
To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How many panels do I need for grommet curtains?
Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
How do you measure rubber grommet size?
Panel Measurements One way that you can determine what size rubber grommet you need is to measure the panel. Specifically, you will need to determine the thickness of the panel, the hole size where the grommet will be applied, and the size of the object that will be going through that hole.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do I know what size curtains to buy?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you measure curtain length?
You can measure from the curtain rod height down to the windowsill then add 2–3 inches. We love seeing this style of curtain length in bedrooms or bathrooms. This is the most common style of curtain length. You can simply measure from your curtain rod height down to the floor.
How far apart should grommets be placed on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.
How high do I hang curtain rod for 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
What size is a #12 grommet?
Grommet and Eyelet Sizing Chart Size Outside Diameter (in millimeters) Depth (in millimeters) #8 (1-1/8″) 50mm 8mm #10 (1-7/16″) 48mm 7mm #12 (1-9/16″) 61.5mm 11mm #12L 72mm 9.5mm.
Can you make curtains with grommets?
DIY Grommet Curtains Beauty2 Grommets add a modern and professional finish to any curtain panel. They also tend to cost more than regular drapes. However, adding grommets to premade or custom panels isn’t as hard as it looks. The secret to having a well-tailored grommet panel is grommet tape.
Are there different sizes of grommets?
What Are The Standard Grommet Sizes? The most common grommets for banner sizes are 3/16 of an inch, 3/8 of an inch, one half of an inch, 1 inch, 7/16 of an inch, three, in the most widely used size being a grommet is 3/8 of an inch.
Is standard for rubber grommet?
IS 5270: Rubber Grommets for General Purposes.
How big is a grommet hole?
Grommet Size Chart Size ID (inner diameter) Hole Size #0 0.248 1/4 #1 0.287 9/32 #2 0.362 3/8 #3 0.433 7/16.
What size curtains do I need for a 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for a 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
How many curtain panels do I need calculator?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
How do you measure for grommet curtain rods?
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
What diameter should my curtain rod be?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
