Table of Contents
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
How do you calculate yards of gravel?
Multiply the length, width, and height together to find the volume of the space. Now, convert the volume to cubic yards. If the initial measurements were in inches, then convert cubic inches to cubic yards by dividing by 46,656. If the initial measurements were in feet, then divide by 27 to get cubic yards.
How much area does a ton of gravel cover?
A ton of gravel will cover approximately 100 square feet, 2 inches deep.
How do I calculate how much gravel I need for my driveway?
Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.
How many yards of pea gravel do I need calculator?
Measure the length, width and depth in feet of the area to be covered. Multiply the three numbers together. Divide by 27 to get the number of cubic yards of pea gravel needed. For example, if the area is 9 feet square and the gravel is to be a foot deep, multiply 9 by 9 by 1 to get 81.
How deep should you lay gravel?
Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.
How many square feet will 5 tons of gravel cover?
Regarding this, “how much area does 5 tons of gravel cover?, typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.
How many sq ft are in a ton?
600 sq ft Area (Square Feet): BTU Tonnage 600 sq ft 12,000 BTU 1 Ton 900 sq ft 18,000 BTU 1.5 Tons 1,200 sq ft 24,000 BTU 2 Tons 1,500 sq ft 30,000 BTU 2.5 Tons.
How much area does a ton of 20mm gravel cover?
Based on our 20mm sized stones, 1 bulk bag of gravel will cover approximately 12 sqm at 50mm depth for paths and driveways.
How many square feet will 25 tons of gravel cover?
How many square feet will 25 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 25 tons of gravel = 108 × 25 = 2700 sq ft coverage, therefore 25 tons of gravel can cover around 2700 square feet or 300 square yards or 250 square meters area for standard 2 inch depth.
How do I figure out how many tons of gravel I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How many inches deep should a gravel driveway be?
A standard driveway is between 12 and 18 inches deep. Each of these gravel layers is a minimum of four inches deep, and some folks recommend making each layer as much as six inches. If you have a large area to dig out for your new driveway, the idea of a shovel and wheelbarrow may not be very appealing at this point.
How much gravel is in a dump truck?
It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.
How many square feet does a 50 lb bag of gravel cover?
Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3″ deep.
How much area will a yard of pea gravel cover?
We know that 1 cubic yard of pea gravel covers about 324 square feet at a depth of 1 inch. Divide that 324 by your desired depth of gravel in inches to figure out how many square feet you can cover with 1 cubic yard of pea gravel for your project.
How many yards is a ton of #57 gravel?
Calculate #57 Limestone Gravel Coverage (Square feet) 400 sq ft Volume (Cubic feet) 67 cu ft Volume (Cubic yards) 2.5 cu yd Estimated amount (Pounds) 5,951 lb Estimated amount (Tons) 2.98 ton.
Should I lay sand under gravel?
So as previously commented how much sand and what is under it will affect success and how long it lasts before sand comes through (if it does). The gravel will work into the sand, but this is not bad at all (concrete is sand, gravel and a cement, 2 out of the 3).
Can I put gravel directly on soil?
Gravel is a notoriously difficult material to work with and maintain, especially when it is so spread out, like with a garden path. It is because of this that the process for how to lay a gravel path on soil needs to be followed carefully, and the area properly prepared, as the following article reveals…Sep 17, 2019.
What do you put under gravel?
When to Use Landscape Fabric Landscape fabric is laid over soil and then mulch is layered on top of the fabric. Landscape fabric also works well beneath gravel, rock, or hardscaping. It also can be used beneath flower beds or ground cover to reduce weeds and the need for weed control.
