Table of Contents
How do you measure what size curtains you need?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How much wider Should curtain rod be than the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
What diameter should my curtain rod be?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How far should curtain pole be either side of window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).
What is a standard curtain rod size?
Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How do you measure for curtain fabric?
To measure fabric for curtains, start by measuring the width and height of your window. If you want floor length curtains, measure from the bottom of the window to the floor, subtract 1 inch, and add that number to the height of the window to get the height of the fabric you should use.
How far below window should curtains hang?
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
How high should you hang curtains with 8 foot ceiling?
How High to Hang Curtains 8 Foot Ceiling. An 8 foot ceiling is pretty standard for a residential home. With this standard height will be safe to put the rod about 6 inches above the top of the framing of the window. This avoids any extra framing and gives space between the frame and the rod.
Do all curtain rods need to match?
Curtain rods should “match” the fabric. Heavier drapes such as velvets work well on large and somewhat decorative rods while light silks and sheers can sit on light-weight, thinner bars. That said, hardware should also compliment the rest of the room, and it’s helpful to repeat a material or tie in a theme.
Are curtains measured per curtain?
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How do I calculate how much curtains I need?
If you’re adding trim to the bottom of the curtains, take the fabric width you calculated per the Homes Furnishing guide and divide that number by 36 to determine the width in yards. Multiply the result by the cost per yard of the trim.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How do you measure fabric for rod pocket curtains?
How to Measure: Rod Pocket Curtains MEASURE LENGTH. Measure from the top of the curtain rod down to where you want the curtain to fall. MEASURE WIDTH. The curtain should measure double the width of the window for fullness. STYLING TIP. The length of your curtain is a matter of personal preference.
