Table of Contents
Multiply the width and height to find the total area in inches, then divide by 144 to find the amount of square feet needed (amount of inches in a square foot). For example, if your space is 48″ (width) x 18″ (height) = 864. 864/144 = 6 square feet. Be sure to measure every area that needs tile and add them together!Aug 23, 2016.
How do I calculate how much tile I need?
Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet. Then, divide the area you’re tiling by the square footage of one tile to determine how many tiles you need.
Where do you start when tiling a backsplash?
The magic spot is the base of the backsplash along the countertop edge or lip if it goes up the back of the wall in the center of the countertop. When you start in the middle, you can be sure to get a symmetrical look as you work toward the sides.
What is the average square footage of a kitchen backsplash?
The average backsplash is roughly 30 square feet and can be made of nearly any material. With varying material costs, this can lead to large price ranges for the project.
How high should a tile splashback be?
A traditional tiled kitchen splashback The height of the splashback is normally 600mm and you can tile this block in its entirety. Simple. This works well if you want a feature tile as it is nicely encased by benchtop and joinery. The tiles can be lit from above and it is all neat and tidy.
How many 12×12 tiles do I need for a 12×12 room?
Divide the total number of tiles you need by 12. You should do this because 12 by 12 tiles are usually sold in boxes of 12, so you’ll need to know how many boxes of tile to buy. For example, if you calculated a total of 186 square feet, this works out to 15.5 boxes.
How many sq ft is 12×12?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
Should you start tile backsplash in the corner?
Step 1: Lay Out Your Backsplash Tile Design If you are doing a straight wall—like my laundry nook, it’s best to start at the center and work your way outward. However, if you are doing a corner, it’s better to start in the corner and work your way out.
Where do you start when tiling a wall?
It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
How many boxes of tile do I need for a backsplash?
Multiply the length times the width of your chosen backsplash tile. For our example, we’ll use a tile that is 8 inches tall/long by 6 inches wide: 8 X 6 = 48 square inches of area per tile. Divide the area per tile into the total material needed: 3955 divided by 48 equals 83 tiles required for the backsplash.
How much should a backsplash cost?
The average cost for kitchen backsplash is roughly $400 to $600 per 16 square foot, excluding labor. You could pay about $300 to $400 per 16 square foot for cheaper ceramic variations, or between $650 and $1,000 per 16 square foot for high-quality types.
How much does it cost to install backsplash per square foot?
How much does it cost to install a tile backsplash? Tile backsplash installation can cost between $10 and $40 per square foot, and the national average cost is $445. However, homeowners may pay more than $1,000 to install backsplash, while others may pay several hundred dollars.
How high should tile go in kitchen?
The backsplash is the area of your kitchen between the upper and lower cabinets. Most of the time, this area measures between 15 to 18 inches high, so the backsplash should be tiled to that height as well.
Where should a kitchen backsplash end?
The best rule for kitchen backsplash placement is to look for a natural stopping point. This could be a wall, a window, a cabinet edge, or anything else in between. You can use tile edging trim or bullnose tile to create a distinct edge for the backsplash.
How high should a bathroom Splashback be?
How high should a bathroom splashback be? The standard height recommended by most contractors is 4 inches. This height provides sufficient protection from moisture. Make a feature of your splashback around the sink with those expensive tiles you longed for and use less expensive tiles elsewhere.
How much does it cost to tile a 12X12 room?
How much does labor cost to tile a shower? Item Cost Materials $400 Base $100-$1,000 Removal and disposal of old tiles $400-500 Labor – Includes setting and grouting $10-$20 per square foot.
How many boxes of tiles do I need for a room?
Divide the total square footage of the room by the total square footage of the tile in the box. In our example, let’s say each box contains 10 square feet of tile. So if you need 120 square feet, 10 goes into 120 12 times, so you’ll need to buy at least 12 boxes. Calculate the overage you’ll need.
How many 12X12 tiles are in a box?
Packaging Details: Size :30X30 CM (12X12 Inch)Packing :1 Box = 10 PcsThickness :8-9 mmWeight :1 Box = 12 KgWork Area :1 Box = 9.69 Sq. Ft.
How do I estimate how much mulch I need?
Keep in mind that mulch is sold by the cubic yard. One cubic yard of the material covers a 324-square-foot area an inch deep. So, to determine your total, multiply your square footage by the depth in inches desired, then divide by 324. Here’s your formula: Square footage x desired depth / 324 = cubic yards needed.
How many BTU do I need for a 12×12 room?
If you want to properly cool down a 300 square foot area (or room), you need a 6,000 BTU air conditioner. Obviously, the problem arises when you have a tiny 12×12 room, for example. According to the US Department of Energy directive, an air conditioner’s most appropriate size would be 2,880 BTU unit.
